Ad
related to: what temperature can hdpe withstand pressure at 40 mph compared to 1 mm
Search results
Results from the WOW.Com Content Network
HDPE is known for its high strength-to-density ratio. [4] The density of HDPE ranges from 930 to 970 kg/m 3. [5] Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength (38 MPa versus 21 MPa) than LDPE. [6]
In the so-called Engel process, a mixture of HDPE and 2% [42] peroxide is at first mixed at low temperatures in an extruder and then crosslinked at high temperatures (between 200 and 250 °C). [41] The peroxide decomposes to peroxide radicals (RO•), which abstract (remove) hydrogen atoms from the polymer chain, leading to radicals .
Ambient Temperature: A change in ambient temperature to less than 50 °F (10 °C) or greater than 125 °F (52 °C) (XXVI–4412(b)). (10) Interfacial Pressure: A change in interfacial pressure to a value beyond the range tested (XXVI–2321). (11) Decrease in Melt Bead Width: A decrease in melt bead size from that qualified. (12)
In Figure 1, accelerated weathering data is presented. Generally, 2,000 hours corresponds to 1 year in Florida and 1,400 hours to 1 year in Southern Canada. Often terms like “UV-8” are used. UV-8 means the material can withstand 8,000 hours in a Xenon Ci-65 weatherometer. UV-2 or UV-4 would mean 2,000 or 4,000 hours respectively.
MFI Measuring device. The Melt Flow Index (MFI) is a measure of the ease of flow of the melt of a thermoplastic polymer.It is defined as the mass of polymer, in grams, flowing in ten minutes through a capillary of a specific diameter and length by a pressure applied via prescribed alternative gravimetric weights for alternative prescribed temperatures.
The contribution of the muscle to the specific heat of the body is approximately 47%, and the contribution of the fat and skin is approximately 24%. The specific heat of tissues range from ~0.7 kJ · kg−1 · °C−1 for tooth (enamel) to 4.2 kJ · kg−1 · °C−1 for eye (sclera). [13]
The heat distortion temperature is determined by the following test procedure outlined in ASTM D648. The test specimen is loaded in three-point bending in the edgewise direction. The outer fiber stress used for testing is either 0.455 MPa or 1.82 MPa, and the temperature is increased at 2 °C/min until the specimen deflects 0.25 mm.
Low molecular weight poly-alpha-olefins are useful as synthetic lubricants such as synthetic motor oils for vehicles and can be used over a wide temperature range. [ 8 ] [ 10 ] Even polyethylenes copolymerized with a small amount of alpha-olefins (such as 1-hexene , 1-octene , or longer) are more flexible than simple straight-chain high-density ...
Ad
related to: what temperature can hdpe withstand pressure at 40 mph compared to 1 mm