enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The nominal width of a rim is the inner width between the straight sides or beads as one can easily measure it with a caliper (see the standard for drawings and exact measurement procedures). The standard widths of straight-side rims are: 18, 20, 22, 24, 27, 30.5. The standard widths of crochet-type rims are: 13C, 15C, 16C, 17C, 19C, 21C, 23C, 25C

3. European Tyre and Rim Technical Organisation - Wikipedia

   en.wikipedia.org/wiki/European_Tyre_and_Rim...

   ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.

4. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).

5. Rim (wheel) - Wikipedia

   en.wikipedia.org/wiki/Rim_(wheel)

   An example is a 35 mm tire on a rim with an ETRTO 17 mm internal width, or one-and-a-half times the rim's external width. Considerable variation outside this range is safe, but very wide tires on a narrow rim can overstress the rim and damage the tire sidewalls, whereas very narrow tires on a wide rim give a hard ride and can result in a high ...

6. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.

7. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   As an example, if a tire size has two sets of numbers (6-12, 5.00-15, 11.2-24), then the first number (5.00-15) is the approximate width in inches, and the second number (5.00-15) is the rim diameter in inches. If a tire size has three sets of numbers (15x6.00-6, 26x12.00-12, 31x15.50-15), then the first number (26x12.00-12) is the approximate ...