enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tube bending - Wikipedia

   en.wikipedia.org/wiki/Tube_bending

   The process of tube bending involves using mechanical force to push stock material pipe or tubing against a die, forcing the pipe or tube to conform to the shape of the die. Often, stock tubing is held firmly in place while the end is rotated and rolled around the die. Other forms of processing including pushing stock through rollers that bend ...

3. Progressive stamping - Wikipedia

   en.wikipedia.org/wiki/Progressive_stamping

   Progressive Die is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system. The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. [ 1 ]

4. Hydroforming - Wikipedia

   en.wikipedia.org/wiki/Hydroforming

   In tube hydroforming pressure is applied to the inside of a tube that is held by dies with the desired cross sections and forms. When the dies are closed, the tube ends are sealed by axial punches and the tube is filled with hydraulic fluid. The internal pressure can go up to a few thousand bars and it causes the tube to calibrate against the dies.

5. Bending (metalworking) - Wikipedia

   en.wikipedia.org/wiki/Bending_(metalworking)

   Three-point bending is a newer process that uses a die with an adjustable-height bottom tool, moved by a servo motor. The height can be set within 0.01 mm. Adjustments between the ram and the upper tool are made using a hydraulic cushion, which accommodates deviations in sheet thickness.

6. Die (manufacturing) - Wikipedia

   en.wikipedia.org/wiki/Die_(manufacturing)

   A die is a specialized machine tool used in manufacturing industries to cut and/or form material to a desired shape or profile. Stamping dies are used with a press, [1] as opposed to drawing dies (used in the manufacture of wire) and casting dies (used in molding) which are not. Like molds, dies are generally customized to the item they are ...

7. Tool and die maker - Wikipedia

   en.wikipedia.org/wiki/Tool_and_die_maker

   Working from engineering drawings developed by the toolmaker, engineers or technologists, tool makers lay out the design on the raw material (usually metal), then cut it to size and shape using manually controlled machine tools (such as lathes, milling machines, grinding machines, and jig grinders), power tools (such as die grinders and rotary tools), and hand tools (such as files and honing ...

8. Press brake - Wikipedia

   en.wikipedia.org/wiki/Press_brake

   Hemming dies—two-stage dies combining an acute angle die with a flattening tool. Seaming dies—There are a number of ways to build dies to produce seams in sheets and tubes. Radius dies—A radiussed bend can be produced by a rounded punch. The bottom die may be a V-die or may include a spring pad or rubber pad to form the bottom of the die.

9. Die forming (plastics) - Wikipedia

   en.wikipedia.org/wiki/Die_Forming_(Plastics)

   A spiral die is the most complex of the three major blown film die types. The polymer melt is evenly distributed into several feed tubes, which wind around a central mandrel. Each of these feed tubes is connected to the space between the mandrel and outer die walls; the feed tubes gradually diminish in diameter as they spiral around the mandrel.