Search results
Results from the WOW.Com Content Network
The first version of this engine family was a normally aspirated 2.2 L (134 cu in) unit. Developed under the leadership of Chief Engineer – Engine Design and Development Willem Weertman and head of performance tuning Charles "Pete" Hagenbuch, who had worked on most of Chrysler's V-8 engines and the Chrysler Slant-6 engine, [1] it was introduced in the 1981 Dodge Aries, Dodge Omni, Plymouth ...
In straight-three engines, there is no effective difference between the possible firing orders of 1-2-3 and 1-3-2. Straight-four engines typically use a firing order of 1-3-4-2, however some British engines used a firing order of 1-2-4-3. Flat-four engines typically use a firing order of R1-R2-L1-L2. Straight-five engines typically use a firing ...
A straight-three engine (also called an inline-triple or inline-three) [1] [2] [3] is a three-cylinder piston engine where cylinders are arranged in a line along a common crankshaft. Less common than straight-four engine , straight-three engines have nonetheless been used in various motorcycles, cars and agricultural machinery.
The #1 cylinder is at the right rear with cylinders 1, 3, and 5 on the right, while #2 is the left rear with cylinders 2, 4, and 6 on the left. [2]: 24 The firing order is: 1-4-5-2-3-6. The crankcase is cast as two box-section halves. The assembled crankcase provides for four main bearings. There are four cylinder head studs per cylinder, for a ...
The first generation of 6VD1 3.2L SOHC and 6VD1-W DOHC V6 engines were used from 1992 to 1995. The original SOHC 6VD1 featured 175 hp (at 4,888 rpms) with 188 ft*lb of torque. The first generation DOHC 6VD1-W was featured only in RS and some LS trim Trooper/Bighorns between 1992 and 1995, outputting 195 horsepower at 5600 RPM and 195 ft*lb of ...
As with many even-firing engines with four or more cylinders, an even-firing four-cylinder engine is sometimes referred to as a "Screamer". A "long bang" inline 4 engine fires both pairs of cylinders in quick succession or simultaneously; the power delivery is identical to a parallel twin with a 180° crank and similar to a V-twin.
The 3.2 L; 193.8 cu in (3,175 cc) LA3 or Y32SE is a complete redesign of the L81 for the Cadillac CTS and Opel Omega B. [citation needed] It had fixed (non-variable) valve timing, and a variable length intake manifold. The engine has a 87.5 mm × 88 mm (3.44 in × 3.46 in) bore and stroke with a 10.0:1 compression ratio.
V-8 engines were produced by the Daimler Company in displacements of 2.5 L (153 cu in) (1959-1968) and 4.5 L (275 cu in) (1959-1968). Designed for Daimler by Edward Turner, they were initially used in the SP250 sports car and the Majestic Major saloon respectively; ultimately, the 2.5 L was mostly used in the Daimler 2.5 V8 (later named V8-250) saloon made with Jaguar Mark 2 unit bodies from ...