Search results
Results from the WOW.Com Content Network
Corona discharges on the 380kV overhead power line over the Albula Pass (Switzerland) in foggy weather conditions (30 second long exposure) Coronas can generate audible and radio-frequency noise, particularly near electric power transmission lines. Therefore, power transmission equipment is designed to minimize the formation of corona discharge.
High- and medium-voltage power lines in Łomża, Poland Extra high-voltage overhead line 750 kV. Overhead power transmission lines are classified in the electrical power industry by the range of voltages: Low voltage (LV) – less than 1000 Volts, used for connection between a residential or small commercial customer and the utility.
In transmission line faults, roughly 5% - 10% are asymmetric line-to-line faults. [2] line-to-ground fault - a short circuit between one line and ground, very often caused by physical contact, for example due to lightning or other storm damage. In transmission line faults, roughly 65% - 70% are asymmetric line-to-ground faults. [2]
The amount of power that can be sent over a transmission line varies with the length of the line. The heating of short line conductors due to line losses sets a thermal limit. If too much current is drawn, conductors may sag too close to the ground, or conductors and equipment may overheat.
Although this is more hazardous for personnel than working on electrical equipment with the power off, live-line maintenance techniques are used in the electric power distribution industry to avoid the disruption and high economic costs of having to turn off power to customers to perform essential periodic maintenance on transmission lines and ...
In an electrical grid, contingency is an unexpected failure of a single principal component (e.g., an electrical generator or a power transmission line) [1] that causes the change of the system state large enough to endanger the grid security. [2]
Aeolian vibration causes damaging stress fatigue to the cable [5] and represents the principal cause of failure of conductor strands. [4] The ends of a power line span, where it is clamped to the transmission towers, are at most risk. [5] The effect becomes more pronounced with increased cable tension, [5] as its natural self-damping is reduced.
A time-domain reflectometer; an instrument used to locate the position of faults on lines from the time taken for a reflected wave to return from the discontinuity.. A signal travelling along an electrical transmission line will be partly, or wholly, reflected back in the opposite direction when the travelling signal encounters a discontinuity in the characteristic impedance of the line, or if ...