Search results
Results from the WOW.Com Content Network
The clutch brake not only slows or stops the idle gear axis but can also prevent shifting into gear until the clutch pedal is released a few centimetres (or inches) off the floor. In order to shift into gear, the clutch must be halfway off the floor, otherwise, the clutch brake will prevent the transmission from being shifted into or out of gear.
The transmission brake is the yellow drum, to the right rear of the transfer box. A transmission brake or driveline parking brake is an inboard vehicle brake that is applied to the drivetrain rather than to the wheels. Historically, some early cars used transmission brakes as the normal driving brake and often had wheel brakes on only one axle ...
A dual-clutch transmission (DCT, sometimes referred to as a twin-clutch transmission, or double-clutch transmission) uses two separate clutches for odd and even gear sets. [36] The design is often similar to two separate manual transmissions with their respective clutches contained within one housing, and working as one unit.
The parking pawl locks the transmission's output shaft to the transmission casing by engaging a pawl (a pin) that engages in a notched wheel on the shaft, stopping it (and thus the driven wheels) from rotating. The main components of a parking pawl mechanism are the parking gear, parking pawl, actuator rod, cam collar, cam plate, pivot pin, and ...
A continuously variable transmission (CVT) is an automated transmission that can change through a continuous range of gear ratios, typically resulting in better fuel economy in gasoline applications. [1] This contrasts with other transmissions that provide a limited number of gear ratios in fixed steps.
Typically, the controls for a compression brake consist of an on/off switch and often a selector that controls the number of cylinders on which the brake is active. Throttle and clutch switches are integral with the system. Activation occurs when both the clutch and the throttle are released with the transmission in gear.
Couplings, Clutches & Brakes (CCB): Altra's coupling, heavy-duty clutch and brake, overrunning clutch and belted drive brands are grouped together to allow for extensive cross-brand engineering collaboration. TB Wood's, Ameridrives, Bibby Turboflex, Lamiflex, Ameridrives Power Transmission, and Huco, together with Wichita Clutch, Twiflex ...
The Ford-O-Matic two-speed transmission was introduced in 1959. A simplified version of the Cruise-O-Matic, it combined a torque connector and a compound planetary gear set. A front unit (multiple-disc) clutch provided high gear, a front band on the clutch drum provided low gear, and a band on the rear unit internal gear drum provided reverse.