Search results
Results from the WOW.Com Content Network
One GGE of natural gas is 126.67 cubic feet (3.587 m 3) at standard conditions. This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22]
AMFA specifies the energy content of 100 cubic feet of natural gas to be equal to 0.823 gallons-equivalent of natural gas, and the gallon equivalency of natural gas is considered to have a fuel content, similar to that for alcohol fuels, equal to 0.15 gallons of fuel.
Diesel fuel is commonly used in oil and gas extracting equipment, although some locales use electric or natural gas powered equipment. Tractors and heavy equipment were often multifuel in the 1920s through 1940s, running either spark-ignition and low-compression engines, akryod engines, or diesel engines.
Retail markup over crude oil and wholesale gasoline, 2014–2019 Oil, gas, and diesel prices RBOB Gasoline Prices. In 2008, a report by Cambridge Energy Research Associates stated that 2007 had been the year of peak gasoline usage in the United States, and that record energy prices would cause an "enduring shift" in energy consumption practices. [6]
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Assuming the Emma Maersk consumes diesel (as opposed to fuel oil which would be the more precise fuel) then 1 kg diesel = 1.202 litres = 0.317 US gallons. This corresponds to 46,525 kJ. Assuming a standard 14 tonnes per container (per teu) this yields 74 kJ per tonne-km at a speed of 45 km/h (24 knots).
A marine LNG engine is a dual fuel engine that uses natural gas and bunker fuel to convert chemical energy in to mechanical energy. Due to natural gas' cleaner burning properties, the use of natural gas in merchant ship propulsion plants is becoming an option for companies in order to comply with IMO and MARPOL environmental regulations.
According to Primus Green Energy, the STG+ process converts natural gas into 90+-octane gasoline at approximately 5 US gallons per million British thermal units (65 litres per megawatt-hour). [4] The energy content of gasoline is 120,000 to 125,000 British thermal units per US gallon (9.3 to 9.7 kilowatt-hours per litre), making this process ...