Search results
Results from the WOW.Com Content Network
The saturation curve is at 100% RH, while dry air is at 0% RH. Humidity ratio: These are the horizontal lines on the chart. Humidity ratio is usually expressed as mass of moisture per mass of dry air (pounds or kilograms of moisture per pound or kilogram of dry air, respectively).
A worker sprays a urethane finish onto a timber. Wood finishing refers to the process of refining or protecting a wooden surface, especially in the production of furniture where typically it represents between 5 and 30% of manufacturing costs. [1] [2]
Further drying of the wood results in strengthening of the wood fibres, [1] and is usually accompanied by shrinkage. Wood is normally dried to a point where it is in equilibrium with the atmospheric moisture content or relative humidity, and since this varies so does the equilibrium moisture content. Laboratory testing has found the average FSP ...
The saturation vapor density (SVD) is the maximum density of water vapor in air at a given temperature. [1] The concept is related to saturation vapor pressure (SVP). It can be used to calculate exact quantity of water vapor in the air from a relative humidity (RH = % local air humidity measured / local total air humidity possible ) Given an RH percentage, the density of water in the air is ...
Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibre, often in a defibrator, combining it with wax and a resin binder, and forming it into panels by applying high temperature and pressure. [1] MDF is generally denser than plywood.
In atmospheric chemistry, mixing ratio usually refers to the mole ratio r i, which is defined as the amount of a constituent n i divided by the total amount of all other constituents in a mixture: = The mole ratio is also called amount ratio. [2]
Wood drying (also seasoning lumber or wood seasoning) reduces the moisture content of wood before its use. When the drying is done in a kiln, the product is known as kiln-dried timber or lumber, whereas air drying is the more traditional method. There are two main reasons for drying wood: Woodworking
Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...