Search results
Results from the WOW.Com Content Network
The nasal cannula (NC) is a device used to deliver supplemental oxygen or increased airflow to a patient or person in need of respiratory help. This device consists of a lightweight tube which on one end splits into two prongs which are placed in the nostrils curving toward the sinuses behind the nose, and from which a mixture of air and oxygen flows. [1]
The simple face mask can deliver higher flow rates than nasal cannula (6–10 liters per minute) for an FiO2 of 30- 60% oxygen. [1] Nasal cannula and simple face masks are described as low flow delivery systems. [2] [3] Unlike the non-rebreather and partial rebreather masks, the simple face mask lacks a reservoir bag. It also has holes in the ...
Example of measurement of efficiency of the respirator (in the workplace). Description: (1) personal sampling pump, (2) the cassette and the filter for determining the concentration (in the breathing zone), (3) the sampling line (from the breathing zone), (4) the cassette and the filter to determine the concentration (under a mask), and (5) the sampling line (from the mask).
An open circuit SCBA typically has three main components: a high-pressure gas storage cylinder, (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and a respiratory interface, which may be a mouthpiece, half mask or full-face mask, assembled and mounted on a framed carrying harness.
An open circuit SCBA typically has three main components: a high-pressure gas storage cylinder, (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and a respiratory interface, which may be a mouthpiece, half mask or full-face mask, assembled and mounted on a framed carrying harness. [72]
A non-rebreather mask (NRB, non-rebreather, non-rebreather facemask, etc.) is a device used in medicine to assist in the delivery of oxygen therapy. A NRB requires that the patient can breathe unassisted, but unlike a low-flow nasal cannula , the NRB allows for the delivery of higher concentrations of oxygen .
The main components of flow-restricted, oxygen-powered ventilation devices include An inspiratory pressure safety release valve. A trigger or level positioned to allow both hands to remain on the mask to provide an airtight seal while supporting and tilting the patients head. A peak flow rate of 100% oxygen at up to 40 L/min.
An oxygen concentrator takes in air and removes nitrogen from it, leaving an oxygen-enriched gas for use by people requiring medical oxygen due to low oxygen levels in their blood. [4] Oxygen concentrators provide an economical source of oxygen in industrial processes, where they are also known as oxygen gas generators or oxygen generation plants.