Search results
Results from the WOW.Com Content Network
The pulse-repetition frequency (PRF) is the number of pulses of a repeating signal in a specific time unit. The term is used within a number of technical disciplines, notably radar. In radar, a radio signal of a particular carrier frequency is turned on and off; the term "frequency" refers to the carrier, while the PRF refers to the number of ...
Range ambiguity occurs when the time taken for an echo to return from a target is greater than the pulse repetition period (T); if the interval between transmitted pulses is 1000 microseconds, and the return-time of a pulse from a distant target is 1200 microseconds, the apparent distance of the target is only 200 microseconds.
Pulse width is an important measure in radar systems. Radars transmit pulses of radio frequency energy out of an antenna and then listen for their reflection off of target objects. The amount of energy that is returned to the radar receiver is a function of the peak energy of the pulse, the pulse width, and the pulse repetition frequency.
As electronics have improved many radars now can change their pulse repetition frequency, thereby changing their range. The newest radars fire two pulses during one cell, one for short range (about 10 km (6.2 miles)) and a separate signal for longer ranges (about 100 km (62 miles)).
A pulse per second (PPS or 1PPS) is an electrical signal that has a width of less than one second and a sharply rising or abruptly falling edge that accurately repeats once per second. PPS signals are output by radio beacons, frequency standards , other types of precision oscillators and some GPS receivers.
Frequency Fixed: 5480 plus or minus 30 MHz Tunable: 5450 to 5825 MHz Pulse repetition frequency (internal): 341, 366, 394, 467, 569, 682, 732, 853, 1024, 1280, 1364 or 1707 pulses per second Pulse width: 0.25, 0.50, 1.0 μs Code groups: 5 pulses max, within 0.001 duty cycle limitation of transmitter.
Similarly, for pulse (10001000) the duty cycle will be 25% because the pulse remains high only for 1/4 of the period and remains low for 3/4 of the period. Electrical motors typically use less than a 100% duty cycle. For example, if a motor runs for one out of 100 seconds, or 1/100 of the time, then, its duty cycle is 1/100, or 1 percent. [10]
In this example there are 1000 pulses per second (one kilohertz pulse rate) with a gated pulse width of 42 μs. The pulse packet frequency in this example is 27.125 MHz of RF energy. The duty cycle for a pulsed radio frequency is the percent time the RF packet is on, 4.2% for this example ([0.042 ms × 1000 pulses divided by 1000 ms/s] × 100).