Search results
Results from the WOW.Com Content Network
These figures were used to create the charts Image:Oil consumption per day by region from 1980 to 2006 no labels.svg and Image:Oil consumption per day by region from 1980 to 2006.svg. Snapshots of those two charts are included here.
Crankcase dilution occurs when the fuel oil from the engine gets into the lube oil of the engine. This can be caused by the walls being wetted due to the fuel condensing in the cylinder. If the engine is cold, or there is an excess amount of cooling around the cylinder, [ 1 ] the fuel oil will condense and have a higher chance to end up in the ...
Oil sludge or black sludge is a gel-like or semi-solid deposit inside an internal combustion engine, that can create a catastrophic buildup. It is often the result of contaminated engine oil and occurs when moisture and/or high heat is introduced to engine oil.
However, when they wear, their effectiveness drops, which leaves oil on the cylinder walls during combustion. In some engines, burning a small amount of oil is normal and shouldn't necessarily cause any alarm, whereas heavy oil consumption is a sign that the engine might need an overhaul.
The Stirling engine has the highest theoretical efficiency of any thermal engine but it has a low output power to weight ratio, therefore Stirling engines of practical output tend to be large. The size effect of the Stirling engine is due to its reliance on the expansion of a gas with an increase in temperature and practical limits on the ...
The International Safety Guide for Oil Tankers and Terminals (often shortened to ISGOTT) is a standard code of practice for the safe operation of Oil tankers and Oil terminals. [1] Published by Witherbys , it is a joint publication produced by the International Chamber of Shipping (ICS), the Oil Companies International Marine Forum (OCIMF), and ...
© 2025 Yahoo. All rights reserved.
These engines were designed to have a total-loss lubrication system, with the motor oil held in a separate tank from the fuel in the vehicle, and not pre-mixed with it as with two-cycle engines, but mixed within the engine instead while running. Castor oil was often used because it lubricates well at the high temperatures found in air-cooled ...