Search results
Results from the WOW.Com Content Network
In the United States old prison cells are usually about 6 by 8 feet (1.8 by 2.4 m) in dimension which is 48 sq ft (4.5 m 2) [citation needed], (moreover, however, American Correctional Association standards call for a minimum of 70 sq ft (6.5 m 2), with steel or brick walls and one solid or barred door that locks from the outside.
The energy policy EPAct 1992 for residential buildings, restricted toilets to a maximum of 1.6 gpf (Gallons per flush). Kitchen and bathroom faucets were limited to a flow rate of 2.2 gpm (gallons per minute) at 60 psi, and residential shower heads were limited to a flowrate of 2.5 gpm at 80 psi. [3]
In an Olympic swimming pool each lane is 2.5 meters wide [25] and contains 10 lanes, thus making the pool 25 meters wide. Depth: The depth of a swimming pool depends on the purpose of the pool, and whether it is open to the public or strictly for private use. If it is a private casual, relaxing pool, it may go from 1.0 to 2.0 m (3.3 to 6.6 ft ...
An Olympic-size swimming pool holds over 2 acre-feet of water For larger volumes of liquid, one measure commonly used in the media in many countries is the Olympic-size swimming pool. [47] A 50 m × 25 m (164 ft × 82 ft) Olympic swimming pool, built to the FR3 minimum depth of 2 metres (6.6 ft) would hold 2,500 m 3 (660,000 US gal).
A public toilet, restroom, bathroom or washroom is a room or small building with toilets (or urinals) and sinks for use by the general public. The facilities are available to customers, travelers, employees of a business, school pupils or prisoners.
Bathrooms are generally categorized as "master bathroom", containing a shower and a bathtub that is adjoining to the largest bedroom; a "full bathroom" (or "full bath"), containing four plumbing fixtures: a toilet and sink, and either a bathtub with a shower, or a bathtub and a separate shower stall; "half bath" (or "powder room") containing ...
American Association of State Highway and Transportation Officials (AASHTO) recommends having minimum curb-to-curb clearance for two-lane highways of 24 feet (7.3 m) and wall-to-wall clearance of 30 feet (9.1 m), while desired curb-to-curb clearance should be 39 feet (12 m), and wall-to-wall clearance should be 44 feet (13 m). [22]
Minimum lane width: The minimum lane width is 12 feet (3.7 m), identical to most US and state highways. Shoulder width: The minimum width of the left paved shoulder is 4 feet (1.2 m), and of the right paved shoulder 10 feet (3.0 m). With three or more lanes in each direction, both shoulders are to be at least 10 feet (3.0 m) wide.