Search results
Results from the WOW.Com Content Network
Barrel length helps determine a specific cartridge's muzzle velocity. A longer barrel typically yields a greater muzzle velocity, while a shorter barrel yields a lower one. The first AR-15 rifles used a barrel length of 20". In the case of the 223 Remington (M193), ammunition loses or gains about 25.7 ft/sec (7.8 m/s) for each inch of barrel ...
Bushmaster also produces the Patrolman's Carbine variant which features the more common removable "bird cage" flash suppressor, attached to a 16 in (410 mm) barrel, bringing the total barrel length to 17.5 in (440 mm). Both of these comply with current U.S. federal law which states a minimum 16 in (410 mm) barrel for a rifle. There is also a ...
The A-Bolt rifle is a bolt-action rifle with a short-lift bolt angle of 60 degrees. It uses a non-rotating bolt sleeve (partial sleeve on first generation A-bolt rifles). When the bolt is unlocked, smoothness is achieved with three guide ribs aligned with three locking lugs, enabling precise movement (only on the second and third generation A ...
For example, if we compare the .25 WSSM to the .25-06 Remington, we find that the .25-06 requires a .30-06 length action, commonly called a standard or long action. The .25 WSSM case which is almost a full inch shorter, can make use of an existing short action such as used by the 5.56 NATO and .223 Remington family of cartridges. Some ...
The major dimensional difference between the chambers that fire the .223 Remington and the 5.56×45mm NATO is the longer and larger-diameter "freebore" [3] in the 5.56 chamber (0.0566 in (1.44 mm) vs 0.0250 in (0.64 mm) length, 0.2265 in (5.75 mm) vs 0.2240 in (5.69 mm) diameter). Freebore is a short and smooth section of the barrel that is ...
In the spring of 1962 Remington submitted the specifications of the .223 Remington to the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI). With the U.S. military adoption of the M16 assault rifle in 1963, the .223 Remington in a slightly derived form was standardized as the 5.56×45mm NATO. As a commercial sporting cartridge the ...
The maximum overall length is dictated by the need to fit into a box magazine of standard manufacture. For example, the .223 Remington cartridge, when loaded for use in the AR-15 rifle (or the military's M16 rifle), has to fit into the removable box magazine for that rifle. This dictates that the cartridge's maximum overall length be no greater ...
Colt would partially fix this by adding a large flash suppressor, although it did not help with the rifle's loud report. Colt would later raise the barrel length from 10 inches to 11.5 Inches in response to field testing, and the rifle would be adopted as the XM177E2, which was assigned to MACV-SOG units. This reduced the muzzle flash and blast ...