Search results
Results from the WOW.Com Content Network
Logs with a higher density than the density of water would sink. [2] Other logs would get caught in jams, sloughs, or floods, and become lodged in the riverbed. Such logs were often known as "sinkers" or "deadheads." Loggers attempted to reduce the number of logs which remained in the river in order to maximize profits, but some losses were ...
Indeed, pure water is very poorly dissociated by its self-ionisation (at 25 °C, pK w = 14, so at pH = 7, [H +] = [OH –] = 10 −7 mol/L) and thus water itself does not significantly contribute to conduct electricity in an aqueous solution. The resistivity of pure water at 25 °C is 18 MΩ·cm, or its conductivity (C = 1/R) is 0.055 μS/cm.
There the logs were decked onto "rollways." In spring when snow thawed and water levels rose, the logs were rolled into the river, and the drive commenced. [6] To ensure that logs drifted freely along the river, men called "log drivers" or "river pigs" were needed to guide the logs. The drivers typically divided into two groups.
Antique Dutch windmills used to pump water into the embanked river to prevent waterlogging of the lowlands behind them. Waterlogging water is the saturation of soil with water. [1] Soil may be regarded as waterlogged when it is nearly saturated with water much of the time such that its air phase is restricted and anaerobic conditions prevail.
The mound system includes a septic tank, a dosing chamber, and a mound. Wastes from homes are sent to the septic tank where the solid portion sinks to the bottom of the tank. Effluents are sent to a second tank called a dosing chamber, from which they are distributed to the mound at a metered rate (in doses).
A "full deck" of logs awaiting the mill. A log pond is a small natural lake or reservoir used for storage of wooden logs in readiness for milling at a sawmill.Although some mill ponds served this purpose for water-powered sawmills, steam-powered sawmills used log ponds for transportation of logs near the mill; and did not require the elevation drop of watermill reservoirs.
“Stainless steel sinks stay in better shape with a quick rinse each day to avoid water spots and small scratches, while porcelain sinks don’t need cleaning as often but may need a deeper scrub ...
Many relationships between travel time and porosity have been proposed, the most commonly accepted is the Wyllie time-average equation. The equation basically holds that the total travel time recorded on the log is the sum of the time the sonic wave spends travelling the solid part of the rock, called the rock matrix and the time spent travelling through the fluids in the pores.