Search results
Results from the WOW.Com Content Network
As the speed of a handpiece increases, its torque subsequently decreases (slow-speed handpieces have high torque, whereas high-speed handpieces, like the air turbine system, have a low torque) The free running speed of 1:5 gear ratio electric handpiece is the same as its cutting speed; thus, 40,000 motor speed x 5 = 200,000 rpm burr speed.
For instance, a latch type, or right angle bur, is only used in the slow-speed handpiece with contra-angle attachment. A long shank or shaft is only used in slow speed when the contra-angle is not in use, and finally, a friction grip bur, which is a small bur, is used only in the high-speed handpiece.
Cutting speed may be defined as the rate at the workpiece surface, irrespective of the machining operation used. A cutting speed for mild steel of 100 ft/min is the same whether it is the speed of the cutter passing over the workpiece, such as in a turning operation, or the speed of the cutter moving past a workpiece, such as in a milling operation.
The search engine that helps you find exactly what you're looking for. Find the most relevant information, video, images, and answers from all across the Web.
The first HDD [11] had an average seek time of about 600 ms. [12] and by the middle 1970s, HDDs were available with seek times of about 25 ms. [13]Some early PC drives used a stepper motor to move the heads, and as a result had seek times as slow as 80–120 ms, but this was quickly improved by voice coil type actuation in the 1980s, reducing seek times to around 20 ms.
Here’s the good news: you don’t have to live with a frustratingly slow computer. ... System Mechanic has a feature called NetBooster that optimizes your internet connection and maximizes speed ...
Most high speed serial signals, such as PCIe, DisplayPort, and most variants of Ethernet, use a line code which is intended to allow easy clock recovery by means of a PLL. Since this is how the actual receiver works, the most accurate way to slice data for the eye pattern is to implement a PLL with the same characteristics in software.
An ancient shipwreck that dates back to the 7th century B.C.E. has been removed from waters off Spain, two decades after its discovery in 1994.