Ad
related to: soil vapor extraction design
Search results
Results from the WOW.Com Content Network
Soil vapor extraction (SVE) is a physical treatment process for in situ remediation of volatile contaminants in vadose zone (unsaturated) soils (EPA, 2012). SVE (also referred to as in situ soil venting or vacuum extraction) is based on mass transfer of contaminant from the solid (sorbed) and liquid (aqueous or non-aqueous) phases into the gas phase, with subsequent collection of the gas phase ...
Soil vapor extraction (SVE) involves the use of multiple air injection points and multiple soil vapor extraction points that can be installed in contaminated soils to extract vapor phase contaminants above the water table. Contamination must be at least 3 feet (0.91 m) deep beneath the ground surface in order for the system to be effective.
According to the MAGS Manual, written by HSA and adopted by the Florida Department of Environmental Protection, MAGS is performed "by utilizing a typical regenerative blower fitted to a temporary soil vapor extraction well, [such that]a large volume of soil can be assessed with a limited number of samples. While lacking the resolution of ...
Dual-phase vacuum extraction (DPVE), also known as multi-phase extraction, is a technology that uses a high-vacuum system to remove both contaminated groundwater and soil vapor. In DPVE systems, a high-vacuum extraction well is installed with its screened section in the zone of contaminated soils and groundwater.
In-situ technologies include but are not limited to: solidification and stabilization, soil vapor extraction, permeable reactive barriers, monitored natural attenuation, bioremediation-phytoremediation, chemical oxidation, steam-enhanced extraction and in situ thermal desorption and have been used extensively in the USA. [11]
The distance between electrodes and their location is determined from the heat transfer mechanisms associated with vapor extraction, electrical heating, and fluid movement in the contaminated zone. To determine the ideal pattern of electrode and extraction wells, a multi-phase, multi-component, 3-D thermal model is used to simulate the process.
To help promote urban mining, products can be designed to be more repairable and recyclable. Additional research investments and policy interventions could support this objective, experts said ...
Extraction of groundwater or soil vapor with an active electromechanical system, with subsequent stripping of the contaminants from the extract. Containment of the soil contaminants (such as by capping or paving over in place). Phytoremediation, or using plants (such as willow) to extract heavy metals.
Ad
related to: soil vapor extraction design