enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [29] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

3. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes.

4. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Example of tire sizing on an all-terrain vehicle. Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall ...

5. Flat tire facts and guide - AOL

   www.aol.com/finance/flat-tire-facts-guide...

   Spare or donut tire: Although many car manufacturers now include a short-term donut tire with new cars, a few still include a full-size spare tire. It is usually located in the trunk or under the ...

6. Tire maintenance - Wikipedia

   en.wikipedia.org/wiki/Tire_maintenance

   Tire maintenance for motor vehicles is based on several factors. The chief reason for tire replacement is friction from moving contact with road surfaces, causing the tread on the outer perimeter of tires to eventually wear away. When the tread depth becomes too shallow, like for example below 3.2 mm (4/32 in), the tire is worn out and should ...

7. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.