Search results
Results from the WOW.Com Content Network
Deck height for the 4.6 block is 8.937 in (227.0 mm) and connecting rod length is 5.933 in (150.7 mm) center to center, giving the 4.6 L a 1.67:1 rod to stroke ratio. Cylinder bore spacing measures 3.937 in (100.0 mm), which is common to all members of the Modular engine family.
Although the engine is an outgrowth of the Gen-2 V8, these changes cause it to be regarded as the third generation of AMC V8, or "Gen-3". The stroke and deck height on the 290 and 343 were increased by 0.16 in (4.06 mm) on both engines, becoming the 304 cu in (5.0 L) and 360 cu in (5.9 L), respectively.
The first second-generation Oldsmobile V8 330 cu in (5.4 L) "Jetfire Rocket" introduced in 1964 and produced through 1967. It was released one year earlier than the tall deck 425, and debuted the standard 3.385 in (86.0 mm) stroke; bore was 3.938 in (100.0 mm). 330s were painted gold and had forged steel crankshafts.
See today's average mortgage rates for a 30-year fixed mortgage, 15-year fixed, jumbo loans, refinance rates and more — including up-to-date rate news.
Deck Height : 207 mm; The D14A3 and D14A4 engines are identical, the difference is the addition of a small gasket under the throttle body in the D14A3 which restricts the air intake of the engine, lowering the power output. This was done in some European countries to suit local insurance categories.
Deck: The deck assembly is the most visual aspect of the loading dock leveler. Driven and walked over often, most decks have an anti-skid surface such as a tread plate to provide traction at the various working angles. The deck assembly pivots at the back end furthest from the transport vehicle (or, more commonly, the dock door opening).
When the car is too low, the height corrector valve opens to allow more fluid into the suspension cylinder (e.g., the car is loaded). When the car is too high (e.g. after unloading) fluid is returned to the system reservoir via low-pressure return lines. Height correctors act with some delay in order not to correct regular suspension movements.
The camber is a measure of lateral main deck curvature in naval architecture. The curve is applied to a deck transversely, measured as the height of deck at centreline above the height of deck at side. The practice of adding camber to a ship's deck originated in the era of small sailing ships.