Search results
Results from the WOW.Com Content Network
The BOC for vessels is measured as follows: For a catamaran: the perpendicular distance from the centerline of one hull to the centerline of the other hull, measured at deck level. For a trimaran: the perpendicular distance between the centerline of the main hull and the centerline of either ama, measured at deck level. This term in typically ...
The camber is a measure of lateral main deck curvature in naval architecture. The curve is applied to a deck transversely, measured as the height of deck at centreline above the height of deck at side. The practice of adding camber to a ship's deck originated in the era of small sailing ships.
Although the engine is an outgrowth of the Gen-2 V8, these changes cause it to be regarded as the third generation of AMC V8, or "Gen-3". The stroke and deck height on the 290 and 343 were increased by 0.16 in (4.06 mm) on both engines, becoming the 304 cu in (5.0 L) and 360 cu in (5.9 L), respectively.
The bore and the stroke was 88.9 mm × 88.9 mm (3.50 in × 3.50 in), making it a square engine. The block deck height was extended and longer conrods were fitted 158.75 mm (6.250 in) between centres. A Bendix Stromberg two-barrel carburettor was used in place of SU carburettors. [11]
The maximum height, width, and length of general Chinese rolling stock are 4,800 mm (15 ft 9 in), 3,400 mm (11 ft 2 in) and 26 m (85 ft 4 in) respectively, with an extra out-of-gauge load allowance of height and width 5,300 by 4,450 mm (17 ft 5 in by 14 ft 7 in) with some special shape limitation, corresponding to a structure gauge of 5,500 by ...
The "Racing Boss 351" (not to be confused with the Ford 335 engine Cleveland-based Boss 351) is a crate engine based on the 351 cu in (5,752 cc) Ford Windsor engine, but uses Cleveland sized 2.75 in (70 mm) main bearing journals. Deck height choices include 9.2 in (234 mm) and 9.5 in (241 mm).
The first engine in the 335 series was introduced in late 1969 as the 351C. The 400 cu in appeared in the third quarter of 1970, which raised deck height from 9.206 in (234 mm) and tall deck 10.297 in (262 mm) to accommodate a longer stroke, and used larger main bearings for additional strength. [4]
The RB engines, produced from 1959 to 1979, are raised-block (taller) versions of the B engines. All RB engines have a 3 + 3 ⁄ 4 in (95.3 mm) stroke, with the bore being the defining factor in engine size. All RB wedge engines share a deck height of 10.725 in (272.4 mm), and were fitted with 6.768 in (171.9 mm) long connecting rods, resulting ...