Search results
Results from the WOW.Com Content Network
The YZ125 has a 124 cc (7.6 cu in) reed valve-inducted two-stroke engine. It was air cooled from 1974 to 1980, and liquid cooled since 1981. It has a Mikuni 38 mm TMX series carburetor. [6] The engine produces 35 hp (26 kW). [1] The YZ125 has been built with five- or six-speed manual sequential gearbox depending on model year.
Yamaha YA-1. YA-1 built August 1954, produced January 1955. The first bike manufactured by Yamaha was actually a copy of the German DKW RT 125; it had an air-cooled, two-stroke, single cylinder 125 cc engine [1]
2002 was the first season that allowed 990 cc 4-strokes to be raced alongside 500 cc 2-strokes.In a change from their V-4 YZR500, Yamaha designed the YZR-M1 (for "Mission One") with an inline-4 engine because it was the format considered to have the best mutual balance with the frame. [2]
The original YZ250 of 1974 used an air-cooled 250cc two-stroke engine of 70 mm bore and a 64 mm stroke, which was improved semi-annually. The air-cooled motor was replaced in 1982 with a 249 cc liquid-cooled two-stroke reed-valved engine with a mechanical, rather than servo-driven, YPVS exhaust valve for a wider spread of power.
Yamaha Y125Z or better known as Yamaha Z (in Europe, Thailand and Vietnam) is a 125 cc two-stroke moped or underbone motorcycle produced by Yamaha.Debuted in 1998 as a successor of Yamaha Y110SS, the Y125Z was the first two-stroke underbone motorcycle with an YEIS catalytic converter.
The Yamaha YZ450F is a four-stroke racing motocross bike built by Yamaha Motor Corporation.It was the successor to the previous YZ426F which was discontinued in 2003. It is credited by Cycle World and Dirt Rider magazines as the bike that started the four-stroke dirt bike revolution.
In the 21st century the cable jetting technique is used worldwide, from small optical telecom cables (1.8 mm diameter) in small microducts (3 mm internal diameter) up to large copper telecom cables (35 mm diameter) in large ducts (50 mm internal diameter). Jetting is done with a pressure of the compressed air in the order of 10 bar.
The Abrasive Water Suspension Jet (AWSJ) - often called “Slurry Jet” or “Water Abrasive Suspension (WAS) jet” - is a specific type of abrasive water jet, which is used for waterjet cutting. In contrast to the abrasive water injector jet (AWIJ), the abrasive water suspension jet (AWSJ) [ 25 ] is characterised by the fact that the mixing ...