Search results
Results from the WOW.Com Content Network
In some cases, an audio output device can be used as an input device, in order to capture produced sound. Audio input devices allow a user to send audio info to a computer for processing, recording, or carrying out commands. Devices such as microphones allow users to speak to the computer in order to record a voice message or navigate software.
Shure Brothers microphone, model 55S, multi-impedance "Small Unidyne" dynamic from 1951. A microphone, colloquially called a mic (/ m aɪ k /), [1] or mike, [a] is a transducer that converts sound into an electrical signal.
† Although the mic input is usually mono, the input is still a TRS phone socket. Many mono 'computer' mics are fitted with TRS plugs. The tip is for the MIC and the ring is for power (to power an electret-condenser style MIC). There are exceptions to the above: Hosa cables use grey and orange for left and right analogue channels.
The microphone generates its own voltage and needs no power. Devices that use a self-powered microphone: usually a condenser microphone with an internal battery-powered amplifier. Devices that use a plug-in powered microphone: an electret microphone containing an internal FET amplifier. These provide a good quality signal in a very small ...
The transient generated when a microphone is hot-plugged into an input with active phantom power can damage the microphone and possibly the preamp circuit of the input [10] because not all pins of the microphone connector make contact at the same time, and there is an instant when current can flow to charge the capacitance of the cable from one ...
CTIA/AHJ is the de facto TRRS standard. OMTP was mostly used on older hardware devices. However, the old mobile phones have a 2.5 mm jack connectors socket and cannot be used with modern microphone blockers that are typically 3.5 mm, but old mobile phones are notorious for their low security of the hardware itself.
Two pins are used for the mono headphone signal and two pins for the unbalanced microphone signal. The 4-pin XLR connector is also commonly used on amateur radio microphones, but transferring unbalanced audio instead, and using the 4th pin (with the common ground) for a push-to-talk (PTT) circuit activated by a button on the microphone.
A DI unit (direct input or direct inject) is an electronic device typically used in recording studios and in sound reinforcement systems to connect a high output impedance unbalanced output signal to a low-impedance, microphone level, balanced input, usually via an XLR connector and XLR cable.