Search results
Results from the WOW.Com Content Network
The turbo boost is set between 1.4 and 1.81 bar (20.3 and 26.3 psi). With the engine producing up to 224 kW (300 hp; 305 PS) (which comes out to 138.4 kW, 186 hp, 188 PS per litre), it makes the engine as one of the most powerful three-cylinder automobile engines ever produced. [ 2 ]
Bore and stroke is 72 mm × 79.7 mm (2.83 in × 3.14 in), with a compression ratio of 11.0:1. Output is 64 kW (86 hp; 87 PS) at 6000 rpm with 122 N⋅m (90 lbf⋅ft) of torque at 4200 rpm. Daihatsu's internal code for this engine is labeled as K3-DE/VE and the turbocharged version as K3-VET .
It was introduced into European market in 2002 with the Yaris XP10 and XP20 Yaris Verso. [ 1 ] [ 2 ] it was Toyota's first diesel engine to be equipped with an aluminium cylinder block. It was offered in Indian market [ 3 ] in Toyota Corolla (88.4 PS (65 kW; 87 hp) model) [ 4 ] & Etios (68PS model) sedans.
The XP210 series Toyota Yaris is the fourth generation of the Yaris, a subcompact car/supermini manufactured by Toyota for the Japanese, European and Australasian markets. The model was released in October 2019 to replace the XP130 series Yaris/Vitz , and built on the GA-B platform.
The GRMN Yaris ("GRMN" for Gazoo Racing, tuned by the Meister of the Nürburgring) is a limited-production (500 units) variant based on the GR Yaris RZ with: Increased engine torque output by 20 N⋅m (15 lb⋅ft) to 390 N⋅m (288 lb⋅ft), while the horsepower figure remain unchanged.
Download as PDF; Printable version; ... The GR Yaris Hydrogen is a GR Yaris with a modified G16E-GTS engine to run ... Dimensions; Wheelbase: 2,750 mm (108.3 in ...
The engine block is the same as the naturally aspirated 1NZ-FE engine, found in many Toyota models. It retains the same 10.5:1 compression ratio as the naturally aspirated sibling. Output is 143–152 PS (105–112 kW; 141–150 hp) at 6000 rpm with 196–206 N⋅m (145–152 lb⋅ft; 20–21 kg⋅m) of torque at 4000–4800 rpm.
The engine displaced 4.5 L (4,477 cc) with a bore and stroke measuring 100 mm × 95 mm (3.94 in × 3.74 in), respectively and a 9.0:1 compression ratio; the head used Toyota's narrow-angle overhead camshafts for better fuel economy. [1] The 1FZ had only two variants available: the 1FZ-F and the 1FZ-FE.