Search results
Results from the WOW.Com Content Network
The 3.0-liter (approx 245 bhp (183 kW) at 6200 rpm) engine used in the Maserati 300S was based on the Straight-6 design of the Maserati 250F and incorporated a lengthened stroke developed by Vittorio Bellentani to increase the capacity from the original 2.5-litres. The compression ratio was reduced from 12:1 to 9.5:1, partly due to the FIA ...
The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.2 and 2.5 litres.Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec ...
The MDE is Opel's first all-aluminum diesel engine and offers a power density of 85 hp (63 kW) per liter 136 PS (100 kW; 134 hp) in its most powerful version. Maximum power and torque have been increased versus the previous-generation 1.7-liter engine, while fuel consumption has been reduced by up to 10 percent compared with a 2.0-liter CDTI ...
It would mostly share the same technical specifications with its turbocharged 6.0-liter predecessor, other than the fact that it was modified to meet new WLTP emission standards. This new engine was promised to be made available on the fourth generation A8 , following S8 and 60 TFSI/TDI models.
The engine is a 2.0 litres (1,950 cc) turbo-diesel cast aluminum block, inline four-cylinder with balancing shafts. [3] It has a single turbo and its cylinder walls are lined with slippery Nanoslide, an iron-carbon coating that cuts friction.
Hyundai told safety regulators the same metal debris problem caused the expanded recall. Near that same time, Kia told NHTSA about a recall of more than 618,000 model year 2011-2014 Kia Optima, 2012-2014 Sorento and 2011-2013 Sportage vehicles because the Theta engine bearings wore out too early and caused the engines to seize. [ 5 ]
There are two iterations of the 1.2-liter Family 1 engine. As originally introduced it was called the 12ST (also A12ST and S12ST in versions for the Austrian, Swiss, and Swedish markets), it used a 77.8 mm (3.06 in) bore and a 62.9 mm (2.48 in) stroke to produce a displacement of 1,196 cc (73.0 cu in).
The 2.0 litre version was a narrower-bore version of the original 2.3 liter "Lima" four. Bore and stroke are 89.3 and 79.4 mm (3.52 and 3.13 in), respectively, for an overall displacement of 2.0 L; 121.4 cu in (1,990 cc). This engine was installed in the 1983–1988 Ford Rangers and in some Argentinian Ford Taunus. Applications