Search results
Results from the WOW.Com Content Network
Nosler will be offering their complete line of M48 rifles in the .27 Nosler chambering. Initial factory loads will include the 9.7 g (150 gr) AccuBond and the 10.7 g (165 gr) AccuBond Long Range (ABLR) bullets. For handloaders, Nosler will also offer fully prepared Nosler brass, bullets and reloading data for the .27 Nosler.
These Nosler Partition bullets used a specially designed jacket enclosing two separate lead alloy cores. [1] The front core was open on the nose to expand easily, but expansion would stop at the partition (which was a solid layer of copper extending right across the bullet, not just the thin shell of copper which composed the jacket).
45 Raptor : uses the standard 7.62 NATO case, cut to a length of 1.800" from 2.015", resulting in a straight-wall cartridge, neck is sized to 0.452". The resulting COAL of 2.300" is only 1.02 mm longer than the maximum COAL for chambering a cartridge in the smaller AR-15; however, the 45 Raptor chamber pressure is allowed to be as high as ...
The data are all for barrels with a twist rate of 1 turn in 10 inches (250 mm) which is needed to stabilize the heaviest bullets. The higher muzzle velocities reported by Nosler for 165 grains (10.7 g) and heavier bullets use loads employing a slow-burning, double-base powder (Alliant Reloder 22). [citation needed]
Monolithic bullets have been used for hunting big game in the USA for decades. The first popular all-copper bullet was the Barnes X bullet in 1986. [7] Since then, most bullet companies have a monolithic bullet on the market, including Nosler E-tips, Hornady GMX, Barnes TTSX, LRX, VOR-TX, Federal Trophy Copper, Winchester Powercore 95/5, Hammer bullets, Cutting Edge Bullets, Lehigh Defense, G9 ...
Components of a modern bottleneck rifle cartridge. Top-to-bottom: Copper-jacketed bullet, smokeless powder granules, rimless brass case, Boxer primer.. Handloading, or reloading, is the practice of making firearm cartridges by manually assembling the individual components (metallic/polymer case, primer, propellant and projectile), rather than purchasing mass-assembled, factory-loaded ...
The 6.8mm Remington Special Purpose Cartridge (6.8 SPC, 6.8 SPC II or 6.8×43mm) is a rimless bottlenecked intermediate rifle cartridge that was developed by Remington Arms in collaboration with members of the U.S. Army Marksmanship Unit and United States Special Operations Command [6] to possibly replace the 5.56 NATO cartridge in short barreled rifles (SBR) and carbines.
The .378 Weatherby Magnum was designed by Roy Weatherby in 1953. [3] [4] Although inspired by the .416 Rigby, it is an original belted magnum design with no parent case. [5]The cartridge features a high powder capacity relative to its bore size, and can hold upwards of 7.13 g (120 gr) of powder.