Ads
related to: standard v-belt dimensions for cars ford
Search results
Results from the WOW.Com Content Network
2.6, 2.8, 2.9, and 2.9 Cosworth. Most of these were RWD car engines. Some had the same Mitsubishi manual transmission as the 2.0/2.3 but had different bellhousings. The 2.3, 2.8, and 2.9 also made it into the Ranger, and Bronco II. 4.0L was produced by Ford Cologne Germany (like the unrelated and the all-new metric Taurus/Sable FWD 3.0 V6).
The small-block V8 engine was introduced in the 1962 Ford Fairlane and Mercury Meteor cars. Displacing 221 cu in (3.6 L), it was designed to save weight, using thin-wall casting for a short-skirt block that does not extend below the centerline of the crankshaft.
The smallest-displacement engine of the 385 engine family, the 370 was introduced in 1977, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8. Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 390 V8).
An automotive belt with the number "740K6" or "6K740" indicates a belt 74 inches (190 cm) in length, 6 ribs wide, with a rib pitch of 9 ⁄ 64 of an inch (3.6 mm) (a standard thickness for a K series automotive belt would be 4.5mm). A metric equivalent would be usually indicated by "6PK1880" whereby 6 refers to the number of ribs, PK refers to ...
It was used in the Ford Thunderbird, 1959-60 Edsel, Mercury, and some high-end Ford cars. The Ford version was the P-code "Thunderbird V8", which for cars equipped with a manual transmission had a compression ratio of 8.1:1 and was rated at 193 bhp (144 kW) at 4,400 rpm and with 280 lb⋅ft (380 N⋅m) at 2,600 rpm.
The 390 had a bore of 4.05 inches (102.87 mm), stroke of 3.785 inches (96.14 mm), and displacement of 390.04 cu in (6.4 L). It was the most common FE engine in later applications; used in many Ford cars as the standard engine, including the Thunderbird, and in many trucks as well.
Standard 1.6 L output started at 65 hp (48 kW) and 85 lb⋅ft (115 N⋅m). The early North American engines are built with cast pistons and connecting rods, a low-flow version of the CVH head, flat hydraulic lifters, a 0.229" lift camshaft, 32/32 Weber-licensed carburetor, cast exhaust manifold, and low-dome pistons.
The Ford Cologne V6 is a series of 60° cast iron block V6 engines produced by the Ford Motor Company from 1962 to 2011 in displacements between 1.8 L; 110.6 cu in (1,812 cc) and 4.0 L; 244.6 cu in (4,009 cc).
Ads
related to: standard v-belt dimensions for cars ford