Search results
Results from the WOW.Com Content Network
Bronze disease is an irreversible and nearly inexorable corrosion process that occurs when chlorides come into contact with bronze or other copper-bearing alloys. [1] It can occur as both a dark green coating, or as a much lighter whitish fuzzy or furry green coating. [ 1 ]
Protective elements for bronze fountains are particularly important, since water is one of the leading causes for alterations or corrosion in a bronze. [2] Bronze sculptures incorporated in fountains will need more layers of wax, because the spray of water will cause deterioration of the wax at a faster pace than would normally happen.
Bronze, or bronze-like alloys and mixtures, were used for coins over a longer period. Bronze was especially suitable for use in boat and ship fittings prior to the wide employment of stainless steel owing to its combination of toughness and resistance to salt water corrosion. Bronze is still commonly used in ship propellers and submerged bearings.
They are also resistant to corrosion in sea water. Aluminium bronzes' resistance to corrosion results from the aluminium in the alloys, which reacts with atmospheric oxygen to form a thin, tough surface layer of alumina (aluminium oxide) which acts as a barrier to corrosion of the copper-rich alloy. The addition of tin can improve corrosion ...
Concentration cells can form in the deposits of corrosion products, leading to localized corrosion. Accelerated low-water corrosion (ALWC) is a particularly aggressive form of MIC that affects steel piles in seawater near the low water tide mark. It is characterized by an orange sludge, which smells of hydrogen sulfide when treated with acid.
Flow-accelerated corrosion (FAC), also known as flow-assisted corrosion, is a corrosion mechanism in which a normally protective oxide layer on a metal surface dissolves in a fast flowing water. The underlying metal corrodes to re-create the oxide, and thus the metal loss continues.
U.S. government bronze specification H is composed of 83% copper, 14% tin, 3% zinc, and 0.8% phosphorus. [4] Red brass is used to produce pipes, valves, and plumbing fixtures and is considered to offer a good mixture of corrosion resistance, strength and ease of casting. [5] It typically contains 85% copper, 5% tin, 5% lead, and 5% zinc.
A corrosion inhibitor or anti-corrosive is a chemical compound added to a liquid or gas to decrease the corrosion rate of a metal that comes into contact with the fluid. [1] The effectiveness of a corrosion inhibitor depends on fluid composition and dynamics .