Search results
Results from the WOW.Com Content Network
Oxygen transmission rate (OTR) is the measurement of the amount of oxygen gas that passes through a substance over a given period. It is mostly carried out on non-porous materials, where the mode of transport is diffusion, but there are a growing number of applications where the transmission rate also depends on flow through apertures of some description.
It is an oxidising agent roughly equivalent to hydrogen peroxide, and much stronger than molecular oxygen. Nitrous oxide is not flammable at low pressure/temperature, but at about 300 °C (572 °F), its breakdown delivers more oxygen than atmospheric air. It often is mixed with another fuel that is easier to deflagrate.
Eventually practitioners became aware of the need to provide at least 21% oxygen content in the gas (the same percentage as in air). [11] In 1911, the anaesthetist Arthur Ernest Guedel first described the use of self-administration of a nitrous oxide and oxygen mix. It was not until 1961 that the first paper was published by Michael Tunstall ...
Natural air includes 21% oxygen, which is equivalent to F I O 2 of 0.21. Oxygen-enriched air has a higher F I O 2 than 0.21; up to 1.00 which means 100% oxygen. F I O 2 is typically maintained below 0.5 even with mechanical ventilation, to avoid oxygen toxicity, [2] but there are applications when up to 100% is routinely used.
A breathing gas is a mixture of gaseous chemical elements and compounds used for respiration. Air is the most common and only natural breathing gas. Other mixtures of gases, or pure oxygen, are also used in breathing equipment and enclosed habitats such as scuba equipment, surface supplied diving equipment, recompression chambers, high-altitude mountaineering, high-flying aircraft, submarines ...
Consider the first triangular diagram below, which shows all possible mixtures of methane, oxygen and nitrogen. Air is a mixture of about 21 volume percent oxygen, and 79 volume percent inerts (nitrogen). Any mixture of methane and air will therefore lie on the straight line between pure methane and pure air – this is shown as the blue air-line.
An output voltage of 0.2 V (200 mV) DC represents a "lean mixture" of fuel and oxygen, where the amount of oxygen entering the cylinder is sufficient to fully oxidize the carbon monoxide (CO), produced in burning the air and fuel, into carbon dioxide (CO 2). An output voltage of 0.8 V (800 mV) DC represents a "rich mixture", which is high in ...
In which pO 2 is the chosen maximum partial pressure of oxygen in atmospheres absolute and the FO 2 is the fraction of oxygen in the mixture. For example, if a gas contains 36% oxygen (FO 2 = 0.36) and the limiting maximum pO 2 is chosen at 1.4 atmospheres absolute, the MOD in feet of seawater (fsw) [ Notes 1 ] is 33 fsw/atm x [(1.4 ata / 0.36 ...