Search results
Results from the WOW.Com Content Network
Three-prong plugs do not fit into the older, two-prong receptacles. [7] When used as intended, the ground pin of the 3-wire receptacle is to be connected to a grounded cover screw, or to an external ground. In 1969, Underwriters Laboratories mandated three-prong plugs on major appliances for safety. [7]
The Electrical Safety Foundation International has stated: "Never remove the ground pin (the third prong) to make a three-prong plug fit a two-prong outlet". [18] In addition to the dangers of breaking a ground connection, removing the ground pin to make it fit a 1-15R receptacle or extension cord , may result in the live–neutral polarity ...
From 1964-1967, Buick and Oldsmobile versions of this transmission used a torque converter with a variable-pitch stator called Switch-Pitch (by Buick) or Variable Vane (by Oldsmobile). The stator blades moved from high to low position by an electrical solenoid and a stator valve , controlled by a switch on the throttle linkage.
Input stages of AC-drive converter systems. Figure 2 shows the top and bottom views of an air-cooled 10 kW-Vienna Rectifier (400 kHz PWM), with sinusoidal input current s and controlled output voltage. Dimensions are 250mm x 120mm x 40mm, resulting in a power density of 8.5 kW/dm 3. The total weight of the converter is 2.1 kg [10]
A SP THM400 always has an external 2 prong connector, whereas a non-SP may have one or two (mostly one, except two on vehicles equipped with an internal pressure switch for spark timing retard). A Switch Pitch can be identified outside the vehicle (with the torque converter removed) by a narrow front pump spline.
A small solenoid can generate a limited force. An approximate relationship between the required solenoid force F s, the fluid pressure P, and the orifice area A for a direct acting solenoid valve is: [3] = = where d is the orifice diameter. A typical solenoid force might be 15 N (3.4 lb f).
“The Red Dot” (Season three, episode 12) “The Pick” (Season four, episode 13) “The Race” (Season six, episode 10) “The Label Maker” (Season six, episode 12)
The type 15 plug and socket has 3 round pins of 4 mm diameter, plus 2 flat pins (for L2 and L3). It is designed for three phase applications and is rated at 10 A, 250 V/440 V. The socket will also accept types 11 and 12 plugs, and the Europlug. The type 25 plug and socket has 3 rectangular pins, 4 mm x 5 mm, plus 2 flat pins (for L2 and L3).