Search results
Results from the WOW.Com Content Network
An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version. 20-pin Molex 39-29-9202 at the motherboard. 20-pin ...
A power supply with a 24-pin connector can be used on a motherboard with a 20-pin connector. In cases where the motherboard has a 24-pin connector, some power supplies come with two connectors (one with 20-pin and other with 4-pin, i.e. 20+4-pin form) which can be used together to form the 24-pin connector.
The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power. These connectors are polarized so that they usually cannot be inserted incorrectly. They lock into position using an integrated latch.
The male PCB connector on the 3½-inch floppy drive is normally a polarized right-angle male header, which is a TE Connectivity / AMP 171826-4, [4] the straight model is AMP 171825-4. [ 5 ] The shape of the connector housing makes it very easy to determine the pin number allocations by visual inspection.
4.8–6.4 GT/s Sandy Bridge-E/EP and Ivy Bridge-E/EP both support 40 PCIe 3.0 lanes. Using the Xeon focused 2011 socket gives also 4 memory Channels. rPGA 988B/ Socket G2: 2011 Intel Core i7 Intel Core i5 Intel Core i3 (2000, 3000 series) Notebook rPGA: 988 1 2.5 GT/s, 4.8 GT/s Socket FM1: 2011 AMD Llano Processors: Desktop PGA: 905 1.27 5.2 GT/s
The ATX specification requires that the power-good signal ("PWR_OK") go high no sooner than 100 ms after the power rails have stabilized, and remain high for 16 ms after loss of AC power, and fall (to less than 0.4 V) at least 1 ms before the power rails fall out of specification (to 95% of their nominal value).
The sense pin is used to relay the rotation speed of the fan and the control pin is an open-drain or open-collector output, which requires a pull-up to 5 V or 3.3 V in the fan. Unlike linear voltage regulation, where the fan voltage is proportional to the speed, the fan is driven with a constant supply voltage; the speed control is performed by ...
The Pinout of a 4 pin mini-DIN connector (as viewed from the socket) Date: 18 June 2006 (original upload date) Source: No machine-readable source provided. Own work assumed (based on copyright claims). Author: No machine-readable author provided. Mobius assumed (based on copyright claims). SVG development