Ads
related to: dual channel memory slotswalmart.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
Dual-channel memory slots, color-coded orange and yellow for this particular motherboard. Dual-channel-enabled memory controllers in a PC system architecture use two 64-bit data channels. Dual-channel should not be confused with double data rate (DDR), in which data exchange happens twice per DRAM clock. The two technologies are independent of ...
A DIMM (Dual In-line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins . [ 1 ] The vast majority of DIMMs are manufactured in compliance with JEDEC memory standards , although there are proprietary DIMMs.
DDR memory bus width per channel is 64 bits (72 for ECC memory). Total module bit width is a product of bits per chip and number of chips. It also equals number of ranks (rows) multiplied by DDR memory bus width. Consequently, a module with a greater number of chips or using ×8 chips instead of ×4 will have more ranks.
Moreover, if a mainboard has a dual-or quad-channel memory subsystem, all of the memory channels must be upgraded simultaneously. 16-bit modules provide one channel of memory, while 32-bit modules provide two channels. Therefore, a dual-channel mainboard accepting 16-bit modules must have RIMMs added or removed in pairs.
DDR4 memory is supplied in 288-pin dual in-line memory modules (DIMMs), similar in size to 240-pin DDR3 DIMMs. DDR4 RAM modules feature pins that are spaced more closely at 0.85 mm compared to the 1.0 mm spacing in DDR3, allowing for a higher pin density within the same standard DIMM length of 133.35 mm (5¼ inches).
The lower memory clock frequency may also enable power reductions in applications that do not require the highest available data rates. According to JEDEC [5] the maximum recommended voltage is 1.9 volts and should be considered the absolute maximum when memory stability is an issue (such as in servers or other mission critical devices). In ...
Compared to DDR2 memory, DDR3 memory uses less power. Some manufacturers further propose using "dual-gate" transistors to reduce leakage of current. [10]According to JEDEC, [11]: 111 1.575 volts should be considered the absolute maximum when memory stability is the foremost consideration, such as in servers or other mission-critical devices.
The memory controller provides a dual-channel memory mode. The board has two DDR2-800 memory slots, which enables up to 16 GB of RAM memory (using ECC modules). It also supports expansion boards using PCI Express x16 bus.
Ads
related to: dual channel memory slotswalmart.com has been visited by 1M+ users in the past month