enow.com Web Search

  1. Ads

    related to: 1.2 vs 1.5 gpm water faucet

Search results

  1. Results from the WOW.Com Content Network
  2. Low-flow fixtures - Wikipedia

    en.wikipedia.org/wiki/Low-flow_fixtures

    Kitchen and bathroom faucets were limited to a flow rate of 2.2 gpm (gallons per minute) at 60 psi, and residential shower heads were limited to a flowrate of 2.5 gpm at 80 psi. [ 3 ] In response to an increasing number of water shortages and increased water utility rates there has been recent legislation by many states leading the way in water ...

  3. California Green Building Standards Code - Wikipedia

    en.wikipedia.org/wiki/California_Green_Building...

    Concerning the water issue, the code requires a 20% reduction of indoor water use and it uses both a prescriptive and performance method. The prescriptive method provides some technical features that have to be followed: Showerheads ≤ 2.0 gpm (gallons per minute) @ 80 psi; Lavatory faucets1.5 gpm @ 60 psi; Kitchen faucets ≤ 1.8 gpm ...

  4. Emergency eyewash and safety shower station - Wikipedia

    en.wikipedia.org/wiki/Emergency_eyewash_and...

    At 60" (152.4 cm) above the floor, the water pattern should be 20" (50.8 cm) in diameter (Section 4.1.4). If shower enclosure is provided. It should provide 34" in diameter of unobstructed space (86.4 cm) (Section 4.3). Water temperature of safety shower station should be within 60 °F - 100 °F (16 °C - 38 °C).

  5. Sustainable living - Wikipedia

    en.wikipedia.org/wiki/Sustainable_living

    On average, showers were 18% of U.S. indoor water use in 1999, at 6–8 US gallons (23–30 L) per minute traditionally in America. [68] A simple method to reduce this use is to switch to low-flow, high-performance showerheads. These showerheads use only 1.0–1.5 gpm or less. An alternative to replacing the showerhead is to install a converter.

  6. Hyundai Smartstream engine - Wikipedia

    en.wikipedia.org/wiki/Hyundai_Smartstream_engine

    The Smartstream G1.0 T-GDI is a turbocharged inline 3-cylinder engine with gasoline direct injection (GDi); the engine makes 120 PS (118 hp; 88 kW) at 6,000 rpm and 17.5 kg⋅m (127 lb⋅ft; 172 N⋅m) of torque between 1,500 and 4,000 rpm.

  7. Viscosity - Wikipedia

    en.wikipedia.org/wiki/Viscosity

    The centipoise is convenient because the viscosity of water at 20 °C is about 1 cP, and one centipoise is equal to the SI millipascal second (mPa·s). The SI unit of kinematic viscosity is square meter per second (m 2 /s), whereas the CGS unit for kinematic viscosity is the stokes (St, or cm 2 ·s −1 = 0.0001 m 2 ·s −1 ), named after Sir ...

  1. Ads

    related to: 1.2 vs 1.5 gpm water faucet