Search results
Results from the WOW.Com Content Network
The cylinder block is a chromium-nickel iron alloy with a 60-degree design. [ 10 ] : 34 It has a peak gross and net power output of 170 and 155 hp (127 and 116 kW) at 3200 RPM, respectively, and corresponding gross and net torque output of 310 and 290 lb⋅ft (420 and 390 N⋅m) at 2000 RPM, respectively.
The engine block had 4.84-inch (123 mm) bore centers, two-bolt main bearing caps, a "side oiling" lubrication system (the main oil gallery located low on the driver's side of the crankcase), with full-flow oil filter, and interchangeable cylinder heads. Heads used on the high performance 409 and 427 engines had larger ports and valves than ...
The smallest-displacement engine of the 385 engine family, the 370 was introduced after the 429 and 460, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8 in 1977. . Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 3
Known as the Super Stock Plymouth and Ramcharger Dodge, the Max Wedge featured high-flow cylinder heads developed through state-of-the-art (at the time) airflow testing. [6] They had 1 + 7 ⁄ 8 in (48 mm) exhaust valves, which required the cylinder bores to be notched for clearance. The blocks were a special severe-duty casting with larger oil ...
A redesigned cylinder head and manifold for improved air flow. Variable exhaust valve timing (the LW2 engine only had variable intake valve timing) Specially-developed fuel injectors. New pistons with pentroof-style centre-domes and valve eyelets for a higher compression ratio of 12.2:1 (compared to 10.2:1 for the dual fuel engine).
The big-block engines initially used a forged crankshaft with a stroke of 3.975" for the 1965-1967 425 and 400 CID versions; starting in 1968, both the 400 cu in (6.6 L) and the 455 cu in (7.5 L) big blocks used a stroke of 4.25 in (108 mm), with crankshaft material changed to cast iron except in a few rare cases.
Note: this is commonly called the Ford Small-block V8 pattern, though it is used in some "big block"-sized V8's as well as some V6's and I6's. 200 I6 1978-1983 only, partial (4 of 6 bolts) pattern. 250 I6 (except Australian 250/4.1) 255 V8; 289 V8 - (made after August 3, 1964) - had 6 bolts holding bellhousing to block; 302 Cleveland (Australia)
The block entered production in mid 1965 as the Mark IV 396 cu in (6.5 L) "Turbo-Jet," phasing out the first-generation W-series Big-Block. In its first year the 396 was available as the L78 option in Corvettes and full-sized ( Impala , Bel Air , Biscayne ) models, and as the L37 in the intermediate ( Chevelle ) model.