Search results
Results from the WOW.Com Content Network
A hardware interrupt is a condition related to the state of the hardware that may be signaled by an external hardware device, e.g., an interrupt request (IRQ) line on a PC, or detected by devices embedded in processor logic (e.g., the CPU timer in IBM System/370), to communicate that the device needs attention from the operating system (OS) [7] or, if there is no OS, from the bare metal ...
Even in a CPU which supports nested interrupts, a handler is often reached with all interrupts globally masked by a CPU hardware operation. In this architecture, an interrupt handler would normally save the smallest amount of context necessary, and then reset the global interrupt disable flag at the first opportunity, to permit higher priority ...
IRQ 2/9 is the traditional interrupt line for an MPU-401 MIDI port, but this conflicts with the ACPI system control interrupt (SCI is hardwired to IRQ9 on Intel chipsets); [6] this means ISA MPU-401 cards with a hardwired IRQ 2/9, and MPU-401 device drivers with a hardcoded IRQ 2/9, cannot be used in interrupt-driven mode on a system with ACPI ...
The IDT consists of 256 interrupt vectors and the use of the IDT is triggered by three types of events: processor exceptions, hardware interrupts, and software interrupts, which together are referred to as interrupts: Processor exceptions generated by the CPU have fixed mapping to the first up to 32 interrupt vectors. [1]
It helps prioritize IRQs so that the CPU switches execution to the most appropriate interrupt handler (ISR) after the PIC assesses the IRQs' relative priorities. Common modes of interrupt priority include hard priorities, rotating priorities, and cascading priorities. [citation needed] PICs often allow mapping input to outputs in a configurable ...
In computing, an inter-processor interrupt (IPI), also known as a shoulder tap, is a special type of interrupt by which one processor may interrupt another processor in a multiprocessor system if the interrupting processor requires action from the other processor. Actions that might be requested include:
For the "interrupt acknowledge" method, the external device gives the CPU an interrupt handler number. The interrupt acknowledge method is used by the Intel Pentium and many older microprocessors. [8] When the CPU is affected by an interrupt, it looks up the interrupt handler in the interrupt vector table, and transfers control to it.
The system used by NAPI is an example of the hardware-based approach: the system (driver) starts in interrupt enabled state, and the Interrupt handler then disables the interrupt and lets a thread/task handle the event(s) and then task polls the device, processing some number of events and enabling the interrupt.