Search results
Results from the WOW.Com Content Network
The autoignition temperature or self-ignition temperature, often called spontaneous ignition temperature or minimum ignition temperature (or shortly ignition temperature) and formerly also known as kindling point, of a substance is the lowest temperature at which it spontaneously ignites in a normal atmosphere without an external source of ignition, such as a flame or spark. [1]
A diesel-fueled engine has no ignition source (such as the spark plugs in a gasoline engine), so diesel fuel can have a high flash point, but must have a low autoignition temperature. Jet fuel flash points also vary with the composition of the fuel. Both Jet A and Jet A-1 have flash points between 38 and 66 °C (100 and 151 °F), close to that ...
The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons ...
Both CII and CCAI are calculated from the density and kinematic viscosity of the fuel. CII was developed by BP to calculate the autoignition capacity of heavy fuel oils (HFO). It is calculated using the measured kinematic viscosity V (cSt or mm 2 /s) of a given fuel determined at temperature t (°C) and the density ρ 15 at 15°C (kg/m 3). [1]
The fire point, or combustion point, of a fuel is the lowest temperature at which the liquid fuel will continue to burn for at least five seconds after ignition by an open flame of standard dimension. [1] At the flash point, a lower temperature, a substance will ignite briefly, but vapour might not be produced at a rate to sustain the fire ...
It was the primary U.S. Air Force jet fuel between 1951 and 1995. ... (−60 °C), and its maximum burning temperature was 6,670 °F (3,688 °C). [citation needed]
Flashover occurs when the majority of the exposed surfaces in a space are heated to their autoignition temperature and emit flammable gases (see also flash point). Flashover normally occurs at 500 °C (932 °F) or 590 °C (1,100 °F) for ordinary combustibles and an incident heat flux at floor level of 20 kilowatts per square metre (2.5 hp/sq ft).
The high compression ratio in the auxiliary combustion chamber causes the auto-ignition of the homogeneous lean air-fuel mixture therein (no spark plug required); the burnt gas bursts - through some "transfer ports", just before the TDC - into the main combustion chamber triggering its auto-ignition. The engine needs not be structurally stronger.