Search results
Results from the WOW.Com Content Network
A pressure force due controlled flow areas and supply pressure, often called line pressure; The VFS can be designed such that any of these forces act in either axial direction. If the magnetic force acts opposes the pressure force, then increasing current through the solenoid coil will, at steady-state, cause an increase in VFS output pressure.
The internal clutch actuator in a semi-automatic transmission can be powered by either hydraulic, pneumatic, or electric means. [6] [7] Later examples of clutchless manual transmissions used in road cars include the Saab Sensonic transmission, used in the 900 NG, and the Ferrari Valeo auto-manual transmission, used in the Mondial T.
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
A park by wire system engages the parking pawl of a transmission using electrical means, without the traditional mechanical system which involves linkages between the gear shifter and the transmission. Park-by-wire can be considered a part of a shift by wire system, as it shifts the transmission into park mode. [1]
[44] [45] [46] Another early example of this transmission system was introduced in the 1955 Citroën DS, which used a 4-speed BVH transmission. This semi-automatic transmission used an automated clutch, which was actuated using hydraulics. Gear selection also used hydraulics, however, the gear ratio needs to be manually selected by the driver.
The parking pawl locks the transmission's output shaft to the transmission casing by engaging a pawl (a pin) that engages in a notched wheel on the shaft, stopping it (and thus the driven wheels) from rotating. The main components of a parking pawl mechanism are the parking gear, parking pawl, actuator rod, cam collar, cam plate, pivot pin, and ...
This torque converter was nominally about 7in. and achieved a torque multiplication of c2.7 to 1. It also used the reaction arm on the stator as in the N360/N600 to increase hydraulic pressure. It was initially announced in Europe as an automatic as the staff at Honda in Europe assumed that it would like the N600 to be fully automatic.
The 4T80-E transmission is electronically controlled and features an automatic overdrive transaxle with an electronically controlled torque converter clutch. The 4T80 originally used a viscous clutch, but this was changed in 2005 to ECCC. [1] [4] [2] [3] The 4T80 is built at Willow Run Transmission in Ypsilanti, Michigan.