enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Crankset - Wikipedia

   en.wikipedia.org/wiki/Crankset

   The compact crankset provides a compromise between the standard road double crankset (with 39/52 or 39/53 tooth chainrings) and the road triple (with 30/42/52 or 30/39/53 tooth chainrings). The compact crankset has two chainrings and typical ratios are 34/48, 34/50 and 36/50.

3. Bicycle gearing - Wikipedia

   en.wikipedia.org/wiki/Bicycle_gearing

   In the case of road bikes, this is usually around 670 mm. A 700c "standard" wheel has a 622 mm rim diameter. The final wheel diameter depends on the specific tire but will be approximately 622 mm plus twice the tire width. Front/rear measurement only considers the sizes of a chainring and a rear sprocket. Gear inches and metres of development ...

4. Bicycle chain - Wikipedia

   en.wikipedia.org/wiki/Bicycle_chain

   3 ⁄ 32 in (2.4 mm) chains are generally used on bikes with derailleurs such as racing, touring, and mountain bikes. [17] Fixed sprockets and freewheels are also available in 3 ⁄ 32 in (2.4 mm) widths, so fixed-gear and single-speed bikes can be set up to use the narrower and lighter 3 ⁄ 32 in (2.4 mm) chains.)

5. List of bicycle parts - Wikipedia

   en.wikipedia.org/wiki/List_of_bicycle_parts

   Chainring: (one of the) front gear(s), attached to a crank; Chainset: see Crankset; Chainstay: a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends; Chain tensioner: a device to maintain proper chain tension; Chaintug: a device to aid in setting the proper chain tension

6. Bottom bracket - Wikipedia

   en.wikipedia.org/wiki/Bottom_bracket

   Road bikes usually use 68 mm (2.7 in); Italian road bikes use 70 mm (2.8 in); Early model mountain bikes use 73 mm (2.9 in). Later models (1995 and newer) use 68 mm (2.7 in) more commonly. Some downhill bikes even use an 83 mm (3.3 in) bottom bracket shell. Snow bikes use a 100 mm (3.9 in) shell.

7. Gear inches - Wikipedia

   en.wikipedia.org/wiki/Gear_inches

   This is equivalent to doubling the size of the drive wheel; that is, it is like a directly driven bicycle with a 52-inch wheel. That gear is said to be "52 gear inches." A bicycle with a 26-inch wheel, a 48-tooth chainring, and a cassette with gears ranging from 11 to 34 teeth has a lowest gear of 26 × 48 / 34 = 37 gear inches and a highest ...