Search results
Results from the WOW.Com Content Network
Weights are measured in pounds per yard (imperial units in Canada, the United Kingdom and United States) and kilograms per metre in mainland Europe and Australia). 1 kg/m = 2.0159 lb/yd. Commonly, in rail terminology pound is a metonym for the expression pounds per yard and hence a 132–pound rail means a rail of 132 pounds per yard.
The only way to support the weight of this veneer across a wide opening is by providing a shelf angle on which the masonry bears. [1] The shelf angle, in turn, is attached to major elements of the building structure such as floor beams or structural columns. Shelf angles are in reality a horizontal expansion joint which allows growth of the ...
They designed the wings to expand the structural channel in order to cover more area at a lower cost. [2] In 1951, Harry Edwards and Paul Zia designed a 4-foot (1.2 m) wide prestressed double tee section. Non-prestressed double tees were constructed in Miami in 1952 followed by prestressed double tees in 1953. Separately, engineers of ...
In North America and the United Kingdom, rail is graded in pounds per yard (usually shown as pound or lb), so 130-pound rail would weigh 130 lb/yd (64 kg/m). The usual range is 115 to 141 lb/yd (57 to 70 kg/m). In Europe, rail is graded in kilograms per metre and the usual range is 40 to 60 kg/m (81 to 121 lb/yd).
The terms angle iron, ... 275 or 355 denotes the yield strength in newtons per square ... With steel being sold by weight, the structural designer must specify the ...
In structural engineering, deflection is the degree to which a part of a long structural element (such as beam) is deformed laterally (in the direction transverse to its longitudinal axis) under a load. It may be quantified in terms of an angle (angular displacement) or a distance (linear displacement).
Dead loads have small load factors, such as 1.2, because weight is mostly known and accounted for, such as structural members, architectural elements and finishes, large pieces of mechanical, electrical and plumbing (MEP) equipment, and for buildings, it's common to include a Super Imposed Dead Load (SIDL) of around 5 pounds per square foot ...
One type of angle block for use in a Howe truss bridge. Braces and counter-braces are held in place with angle blocks. [13] Angle blocks are triangular in cross-section [13] and should be the same height [13] and width as the parallel of the chord. [1] Angle blocks may be made of wood or iron, [13] although iron is usually used for permanent ...