Search results
Results from the WOW.Com Content Network
The availability of Subscriber Identity Modules allows users to switch networks and handsets at will, aside from a subsidy lock. GSM covers virtually all parts of the world so international roaming is not a problem. The much bigger number of subscribers globally creates a better network effect for GSM handset makers, carriers and end users.
EDGE/EGPRS is implemented as a bolt-on enhancement for 2.5G GSM/GPRS networks, making it easier for existing GSM carriers to upgrade to it. EDGE is a superset to GPRS and can function on any network with GPRS deployed on it, provided the carrier implements the necessary upgrade. EDGE requires no hardware or software changes to be made in GSM ...
Enhanced Data Rates for GSM Evolution (EDGE) (E-GPRS) and Universal Mobile Telecommunications System (UMTS) provide improved radio interfaces with higher data rates, while still being backward compatible with the GSM core network. Enhanced Circuit Switched Data (ECSD) was developed alongside GPRS/EDGE [2]
Typical 2G standards include GSM and IS-95 with extensions via GPRS, EDGE and 1xRTT, providing Internet access to users of originally voice centric 2G networks. Both EDGE and 1xRTT are 3G standards, as defined by the ITU, but are usually marketed as 2.9G due to their comparatively low speeds and high delays when compared to true 3G technologies.
GSM module or GPRS modules are similar to modems, but there's one difference: the modem is an external piece of equipment, whereas the GSM module or GPRS module can be integrated within an electrical or electronic equipment. It is an embedded piece of hardware. A GSM mobile, on the other hand, is a complete embedded system in itself.
GSM Features, 14.4 kbit/s User Data Rate, Release 97: 1998 Q1 GSM Features, GPRS: Release 98: 1999 Q1 GSM Features, AMR codec, EDGE, GPRS for PCS1900 Release 99: 2000 Q1 Specified the first UMTS 3G networks, incorporating a CDMA air interface [9] Release 4: 2001 Q2 Originally called the Release 2000 – added features including an all-IP Core ...
GSM networks operate in a number of different carrier frequency ranges (separated into GSM frequency ranges for 2G and UMTS frequency bands for 3G), with most 2G GSM networks operating in the 900 MHz or 1800 MHz bands. Where these bands were already allocated, the 850 MHz and 1900 MHz bands were used instead (for example in Canada and the ...
Phases 1 and 2 were defined before 3G networks existed, and as such support adding IN services to a GSM network, although they are equally applicable to 2.5G and 3G networks. Phase 3 was defined for 3GPP Releases 99 and 4, and hence is a GSM and UMTS common specification, while Phase 4 was defined as part of 3GPP Release 5.