Search results
Results from the WOW.Com Content Network
Reloading dies for the round are readily available. The .225 Winchester's case is a parent case for some of SSK Industries ' [ 3 ] popular line of JDJ cartridges designed by J.D. Jones , chosen for its strength and semi-rimmed design which makes it well suited for use in break-open actions.
Common rifling twist rates also often have to be tightened to stabilize very long projectiles. Such commercially nonexistent cartridges are termed "wildcats". The use of a wildcat-based (ultra) long-range cartridge demands the use of a custom or customized rifle with an appropriately cut chamber and a fast-twist bore.
Thus the optimum rate of twist for this bullet should be approximately 12 inches per turn. The typical twist of .30-06 caliber rifle barrels is 10 inches per turn, accommodating heavier bullets than in this example. A different twist rate often helps explain why some bullets work better in certain rifles when fired under similar conditions.
Some airgun rifles have a short cone towards the muzzle to improve the speed of the bullet. [clarification needed] A slight gain in the rifling twist, or a slight tapering down of the bore, will still ensure the tight fit of bullet to bore, so when selecting a barrel, the tighter or faster twist end should be chosen for the muzzle. [37] [38] [39]
Civilian AR-15 rifles are commonly found with 1 in 12 inches (30 cm) or 54.8 calibers for older rifles and 1 in 9 inches (23 cm) or 41.1 calibers for most newer rifles, although some are made with 1 in 7 inches (18 cm) or 32 calibers twist rates, the same as used for the M16 rifle. Rifles, which generally fire longer, smaller diameter bullets ...
The .223 Remington (designated 223 Remington by SAAMI [4] and 223 Rem. by the C.I.P. [5], pronounced "two-twenty three") is a rimless, bottlenecked, centerfire intermediate cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command of the United States Army as part of a project to create ...
Initial design focused on optimal performance with supersonic bullets in the 85-115 gr (5.5-7.5 g) class, therefore a 1:11 twist rate barrel with 5R rifling was selected. Subsequent consumer interest in firing "heavy-for-caliber" subsonic bullets led to the design, testing, and production of 1:7 twist barrels to stabilize the longer heavier ...
The .300 Whisper (7.82x34mm) is a CIP standard [1] cartridge in the Whisper family, a group of cartridges developed in the early 1990s by J.D. Jones of SSK Industries.It was developed as a multi-purpose cartridge, capable of utilizing relatively lightweight bullets at supersonic velocities as well as heavier bullets (200–250 grains) at subsonic velocities.