Search results
Results from the WOW.Com Content Network
Bluetooth V4.0 with standard protocol and with low energy protocol; IEEE 802.15.4-2006 (low-level protocol definitions corresponding to the OSI model physical and link layers. Zigbee, 6LoWPAN, etc. build upward in the protocol stack and correspond to the network and transport layers.) Thread (network protocol) UWB; Wireless USB; Zigbee; ANT+
802.11s inherently depends on one of 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac, or 802.11ax to carry the actual traffic. One or more routing protocols suitable to the actual network physical topology are required. 802.11s requires the Hybrid Wireless Mesh Protocol, or HWMP [2] to be supported as a default.
802.11-1997 was the first wireless networking standard in the family, but 802.11b was the first widely accepted one, followed by 802.11a, 802.11g, 802.11n, 802.11ac, and 802.11ax. Other standards in the family (c–f, h, j) are service amendments that are used to extend the current scope of the existing standard, which amendments may also ...
The other purpose of the protocol is to allow low rate 802.11 wireless stations to be used in the sub-gigahertz spectrum. [5] The protocol is one of the IEEE 802.11 technologies which is the most different from the LAN model, especially concerning medium contention. A prominent aspect of 802.11ah is the behavior of stations that are grouped to ...
A major advantage of this protocol is that it allows access of information between physical layer and top layers (MAC and network layer). Some elements of the software stack were developed to allow code updates in situ , i.e., with the nodes embedded in their physical environment and without needing to bring the nodes back into the lab facility ...
IEEE 802.11ac-2013 or 802.11ac is a wireless networking standard in the IEEE 802.11 set of protocols (which is part of the Wi-Fi networking family), providing high-throughput wireless local area networks (WLANs) on the 5 GHz band. [e] The standard has been retroactively labelled as Wi-Fi 5 by Wi-Fi Alliance. [9] [10]
It is a proactive protocol based on distance vectors and operates on IEEE 802.15.4, [2] optimized for multi-hop and many-to-one communication, but also supports one-to-one messages. [citation needed] This protocol is specified in RFC 6550 with special applications in RFCs 5867, 5826, 5673 and 5548. RPL can support a wide variety of link layers ...
Wi-Fi (/ ˈ w aɪ f aɪ /) [1] [a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves.