Ads
related to: audio cable for microphone and camera recorder system
Search results
Results from the WOW.Com Content Network
Audio multicore cables are used to convey many audio signals between two locations, such as in audio recording, sound reinforcement, PA systems and broadcasting. [1] Multicores often route many signals from microphones or musical instruments to a mixing console, and can also carry signals from a mixing console back to speakers.
The initial approach involved utilizing a microphone cable to connect a motion picture camera to an audio recorder, such as those manufactured by Stellavox or Nagra. A camera equipped with a synchronous motor transmits a 60/50 Hz signal to the recorder, which is captured as a sine wave pilot tone.
† Although the mic input is usually mono, the input is still a TRS phone socket. Many mono 'computer' mics are fitted with TRS plugs. The tip is for the MIC and the ring is for power (to power an electret-condenser style MIC). There are exceptions to the above: Hosa cables use grey and orange for left and right analogue channels.
Many small video cameras, laptops, recorders and other consumer devices use a 3.5 mm microphone connector for attaching a microphone to the system. These fall into three categories: [citation needed] Devices that use an unpowered microphone: usually a cheap dynamic or piezoelectric microphone. The microphone generates its own voltage and needs ...
Condenser microphones span the range from telephone mouthpieces through inexpensive karaoke microphones to high-fidelity recording microphones. They generally produce a high-quality audio signal and are now the popular choice in laboratory and recording studio applications. The inherent suitability of this technology is due to the very small ...
A cable conducts the sync pulse from camera to sound recorder. The sync pulse is typically a sine wave of 50 or 60 Hz with an RMS amplitude of approximately 1 volt. [4] This double-system audio recording could then be transferred or "resolved" to sprocketed magnetic film, with sprocket holes that match one to one with the original camera film.
Many microphones operate at low voltage levels and some with high output impedance (hi-Z), which makes long microphone cables especially susceptible to electromagnetic interference. Microphone interconnections are therefore a common application for a balanced interconnection, which allows the receiver to reject most of this induced noise.
The H4 is shorter than a pencil Field recording with H4 on a simple tripod H2 and H4 with 10 eurocents for scale. The H4 Handy Recorder is a handheld digital audio recorder from Zoom, featuring built-in condenser microphones in an X-Y stereo pattern, [1] priced from around US$280 depending upon memory capacity as of 2011.
Ads
related to: audio cable for microphone and camera recorder system