Search results
Results from the WOW.Com Content Network
Examples include the 1923–1930 Cadillac Series 353 (powered by a 353 Cubic inch/5.8-litre engine), and the 1963–1968 BMW 1800 (a 1.8-litre engine) and Lexus LS 400 with a 3,968 cc engine. This was especially common in US muscle cars , like the Ford Mustang Boss 302 and 429, and later GT 5.0L, The Plymouth Roadrunner 383, and the Chevrolet ...
The ZZ632's iron block shares a mold with Chevrolet Performance's ZZ572 crate engines, but the castings are machined to accommodate the huge 632 cubic-inch displacement. The bore grows by 0.040 in (1.0 mm), compared to the 572-cubic-inch V8s, with most of the displacement gain coming from a stroke that is 0.375 in (9.5 mm) longer.
This was based on results of over 1 million test miles, which was unheard of at the time. The 287 was an "oversquare" engine with a bore and stroke of 3 + 3 ⁄ 4 in × 3 + 1 ⁄ 4 in (95.3 mm × 82.6 mm), for a total displacement of 287.2 cu in (4.7 L) and a main bearing diameter of 2.5 inches.
The 361-cubic-inch (5.9 L) 361 was released in 1939 alongside the 426 and 451. The 361 was discontinued in 1949 and replaced by the 360 "Group 2" engine. The 360 and 361 shared the exact same 4 + 1 ⁄ 8 inches (100 mm) bore and 4 + 1 ⁄ 2 inches (110 mm) stroke, but the 361 used the larger "Group 3" block. It produced a maximum 136 hp @ 3000 ...
During the latter years of production, 379-and-432-cubic-inch (6.2 and 7.1 L) versions with enlarged crankshaft journals were manufactured as well. GMC produced a 637-cubic-inch (10.4 L) 60° V8 with a single camshaft using the same general layout (bore and stroke) as the 478 V6. The 637 V8 was the largest-displacement production gasoline V8 ...
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.
The engine was sold in different displacements depending on the model of car and the year and was constructed upon two distinct (possibly more) block castings. The engine block in the smaller displacement versions internally resembled the 1937-53 inline Chevrolet 216, 235 & 261" straight six (the combustion chamber design was quite different ...
The 224-cubic-inch (3.67 L) engine, the larger engine in this family, was introduced in 1917 for the 1918 model year and used only in the Series FA and FB. It had the same bore as the 171, but a longer stroke of 5 + 1 ⁄ 4 in (133 mm), giving it 37 horsepower (28 kW) at 2,000 rpm. Applications: 1918 Chevrolet Series FA (37 hp; 28 kW) [7]