Search results
Results from the WOW.Com Content Network
The big-block engines initially used a forged crankshaft with a stroke of 3.975" for the 1965-1967 425 and 400 CID versions; starting in 1968, both the 400 cu in (6.6 L) and the 455 cu in (7.5 L) big blocks used a stroke of 4.25 in (108 mm), with crankshaft material changed to cast iron except in a few rare cases.
IHC Red Diamond 450D engine (cutaway view) The engine in these vehicles was an International Red Diamond 450D, a 451 cu in (7.4 L) overhead valve inline 6 cylinder gasoline engine developing 125 hp (93 kW) at 2700 rpm. The clutch was made by W.C. Lips, Model Z-32-S, and the transmission was an IHC Model F-54-D. This transmission had 5 forward ...
2.5 L; 152.5 cu in (2,499 cc) straight-four, with two (pushrod-actuated) valves-per-cylinder and indirect fuel injection. 92 mm × 94 mm (3.62 in × 3.70 in), the engine size is variably referred to as either 2,500 or 2,499 cc. This engine too has been called HR 492, signifying four cylinders of 92 mm (3.62 in) bore. Timing gears, not belt.
The big bore allowed for larger, 2.08 in (53 mm), intake valves, and the relatively short stroke helped it to be a free-revving and free-breathing engine. Producing a maximum of 330 hp (246 kW; 335 PS) ( gross ) and 460 lb⋅ft (624 N⋅m) of torque for the 1960 model year, the 383 beat the 392 Hemi that had reached 435 lb⋅ft (590 N⋅m).
The W-series engine was made of cast iron. The engine block had 4.84-inch (123 mm) bore centers, two-bolt main bearing caps, a "side oiling" lubrication system (the main oil gallery located low on the driver's side of the crankcase), with full-flow oil filter, and interchangeable cylinder heads. Heads used on the high performance 409 and 427 ...
Turbo-Hydramatic 425 (TH425 or THM 425, [1] later 325) was an automatic transmission developed and produced by General Motors. The THM425 was a derivative of the THM400; most parts directly interchange and some others will interchange with minor modifications. The internal parts spin the opposite direction in the THM425; the helical angle of ...
The Cummins M-series engine is a straight-six diesel engine designed and produced by Cummins.It displaces 10.8 litres (659.1 cu in).Introduced as the M11 in 1994, it was built on the previous L10 engine (same 4.921 inches (125.0 mm) cylinder bore, but a longer 5.787 inches (147.0 mm) piston stroke compared to the L10's 5.354 inches (136.0 mm) stroke).
The Unimog 425 is the first series production heavy duty Unimog series, made by Daimler-Benz from 1975 to 1988 in the Mercedes-Benz Gaggenau plant, alongside the long-wheelbase model Unimog 435. It was first presented to the public on the 1974 DLG show in Frankfurt, then named Unimog U 120 , indicating a power output of 120 PS (88.3 kW ; 118.4 ...