Search results
Results from the WOW.Com Content Network
An analog signal (in red) encoded to 4-bit PCM digital samples (in blue); the bit depth is four, so each sample's amplitude is one of 16 possible values (16 = 2 4). In digital audio using pulse-code modulation (PCM), bit depth is the number of bits of information in each sample , and it directly corresponds to the resolution of each sample.
Ultimately Sony prevailed on both sample rate (44.1 kHz) and bit depth (16 bits per sample, rather than 14 bits per sample). The technical reasoning behind the rate being chosen is associated with characteristics of human hearing and early digital audio recording systems as described below. [1]: sec. 8.5
Bit depth or sample resolution is the number of bits of information recorded for each sample. Bit depth directly corresponds to the resolution of each sample in a set of digital audio data. Common examples of bit depth include CD quality audio, which is recorded at 16 bits, SACD with effective 20-bit resolution, and DVD-Audio, which can support ...
CD audio, for example, has a sampling rate of 44.1 kHz (44,100 samples per second), and has 16-bit resolution for each stereo channel. Analog signals that have not already been bandlimited must be passed through an anti-aliasing filter before conversion, to prevent the aliasing distortion that is caused by audio signals with frequencies higher ...
Using this technique, the audio data is stored as a sequence of fixed amplitude (i.e. 1-bit) values at a sample rate of 2.884 MHz, which is 64 times the 44.1 kHz sample rate used by CD. At any point in time, the amplitude of the original analog signal is represented by the density of 1's or 0's in the data stream.
Sample rate Bit rate Bits per sample Latency CBR VBR Stereo Multichannel G.711: companding A-law or μ-law, PCM: 8 kHz 64 kbit/s 8 bit 125 μs (typical) Yes No No No G.711.0: Lossless compression of G.711: 8 kHz 0.2–65.6 kbit/s 8 bit 5–40 ms No Yes No No G.711.1: MDCT, A-law, μ-law: 8, 16 kHz 64, 80, 96 kbit/s 16 bit 11.875 ms Yes Yes No No
The Signal-to-quantization-noise ratio is a multiple of the bit depth. Audio CDs use a bit depth of 16-bits, while DVD-Video and Blu-ray discs can use 24-bit audio. The maximum dynamic range of a 16-bit system is about 96 dB, [10] while for 24 bit it is about 144 dB.
High-resolution audio (high-definition audio or HD audio) is a term for audio files with greater than 44.1 kHz sample rate or higher than 16-bit audio bit depth. It commonly refers to 96 or 192 kHz sample rates. However, 44.1 kHz/24-bit, 48 kHz/24-bit and 88.2 kHz/24-bit recordings also exist that are labeled HD audio.