Search results
Results from the WOW.Com Content Network
Popular microphone connector from 1930s to 1980s, originally manufactured by Amphenol. Amphenol sold this production to WPI Interconnect in early 1980s. The Amphenol 80-MC2M, which mates with the 80-PC2F, microphone connector was popular with American radio manufacturers (1950s to 1970s). The Amphenol 80-PC2F connector, that mates with the 80-MC2M
WIRES II - Yaesu did terminate WIRES-II service on Saturday, September 30, 2017 at 06:00 UTC. They suggested in the future, to use the WIRES-X Internet linking system. [2] [3] WIRES-X - Supports the C4FM digital and the voice technology. It enables high sound quality by repeating C4FM digital data as it is via the Internet.
In the ND model Yaesu (Vertex) replaced the FETs with RD07MVS1 FET's but the problem may still exist. Be aware that the RF stage may remain sensitive to damage. [8] The internal battery should be removed if the radio is to be stored for an extended period. In the non-ND model, a failing battery can cause the finals to oscillate which destroys ...
A pair of plugs, known as "GA" or general aviation plugs. 1/4-inch plug for audio (PJ-055), and a 3/16-inch plug for the microphone (PJ-068) U-174/U (Nexus TP-101), U-93A/U (Nexus TP-102), and Nexus TP-120, also known as US NATO, commonly used in helicopters, with a diameter of 0.281 in (7.1 mm) and length 0.761 in (19.3 mm).
The microphone generates its own voltage and needs no power. Devices that use a self-powered microphone: usually a condenser microphone with an internal battery-powered amplifier. Devices that use a plug-in powered microphone: an electret microphone containing an internal FET amplifier. These provide a good quality signal in a very small ...
The Yaesu VX series is a line of two sequences of compact amateur radio handheld transceivers produced by Yaesu. There is a line of ultra-compact lower-power dual-band (2 m and 70 cm) transceivers that started with the VX-1R and was later updated with the VX-2R and VX-3R.
Two examples of different boundary mics (top) and a diagram of the elements of a boundary microphone. The diagram shows the location of the mic capsule, the plate, the aperture, and the pressure zone. In 1978, audio engineers Ed Long and Ron Wickersham studied the effects of the boundary layer in sound recording.
A reference designator unambiguously identifies the location of a component within an electrical schematic or on a printed circuit board.The reference designator usually consists of one or two letters followed by a number, e.g. C3, D1, R4, U15.