Search results
Results from the WOW.Com Content Network
The dew point is the temperature the air needs to be cooled to (at constant pressure) in order to produce a relative humidity of 100% [1].This temperature depends on the pressure and water content of the air.
When measuring dry-bulb temperature, care should be taken to prevent the sensor from being subjected to radiation from neighbouring heat sources. [1] To minimize the effects of radiation on the sensor one could reduce the sensor's emission factor or by reducing the temperature difference between the sensor and the surrounding surfaces or by ...
It is necessary to measure temperatures of both the condensation and evaporation, because the dew point is the equilibrium temperature at which water both condense and evaporate at the same rate. When cooling the mirror, the temperature keeps dropping after it has reached the dew point thus, the condensation temperature measurement is lower ...
Dewcells, [1] [2] dewcels [3] or dew cell [1] [4] are instruments used for determining the dew point. They consist of a small heating element surrounded by a solution of lithium chloride . As the LiCl absorbs moisture from the air, conduction across the heating element increases, current in it increases, and heat increases, evaporating moisture ...
Dew point temperature (DPT) is the temperature at which a moist air sample at the same pressure would reach water vapor "saturation." At this point further removal of heat would result in water vapor condensing into liquid water fog or, if below freezing point, solid hoarfrost. The dew point temperature is measured easily and provides useful ...
Conductive level sensors are ideal for the point level detection of a wide range of conductive liquids such as water, and is especially well suited for highly corrosive liquids such as caustic soda, hydrochloric acid, nitric acid, ferric chloride, and similar liquids. For those conductive liquids that are corrosive, the sensor's electrodes need ...
His equation makes use of the relationship between the LCL and dew point temperature discussed above. In the Earth's atmosphere near the surface, the lapse rate for dry adiabatic lifting is about 9.8 K/km, and the lapse rate of the dew point is about 1.8 K/km (it varies from about 1.6-1.9 K/km). This gives the slopes of the curves shown in the ...
A humidity indicator card (HIC) is a card on which a moisture-sensitive chemical is impregnated such that it will change color when the indicated relative humidity (RH) is exceeded. This has usually been a blotting paper impregnated with cobalt(II) chloride base; Less toxic alternatives include other chemicals such as cobalt-free chloride base ...