Search results
Results from the WOW.Com Content Network
It is a holdover from when spirits, wines and brandies, ale, and beer all had different standard measures of capacity. An Ale Gill (based on the Ale gallon) and a Beer Gill (based on the Beer gallon) were different sizes until standardized as Ale / Beer gallons in 1688, Beer gallons in 1803, and Imperial gallons in 1824. Half (imp.) 284 mL
It is important, where any conversion to °P is involved, that the proper pair of temperatures be used for the conversion table or formula being employed. The current ASBC table is (20 °C/20 °C) meaning that the density is measured at 20 °C (68 °F) and referenced to the density of water at 20 °C (68 °F) (i.e. 0.998203 g/cm 3 or 0.0360624 ...
Log 10 of ethanol vapor pressure vs. temperature. ... Density at 25 °C relative to 25 °C water Freezing temperature, °C 10 °C 20 °C 25 °C 30 °C 0.0: 0.0: 0.0 ...
If a wort was said to be "26 lbs. gravity per barrel" [6] it meant that a standard barrel of 36 imperial gallons of the wort weighed 26 pounds more than a barrel of pure water. [6] The actual measurement was by saccharometer (i.e. hydrometer) correcting for temperature by a calibration scale or else by a special brewer's slide rule. [7]
At relatively low alc/vol, the alcohol percentage by weight is about 4/5 of the alc/vol (e.g., 3.2% ABW is about 4% alc/vol). [25] However, because of the miscibility of alcohol and water, the conversion factor is not constant but rather depends upon the concentration of alcohol. [citation needed]
On 1 January 1980, Britain adopted the ABV system of measurement prescribed by the European Union, of which it was then a member. The OIML recommendation for ABV used by the EU states the alcohol by volume in a mixture containing alcohol as a percentage of the total volume of the mixture at a temperature of 293.15 K [20.00 °C; 68.00 °F].
In countries without labeling, it is possible to calculate the pure alcohol mass in a serving from the concentration, density of alcohol, and volume: = For example, a 350 ml (12 US fl oz) glass of beer with an ABV of 5.5% contains 19.25 ml of pure alcohol, which has a density of 0.78945 g/mL (at 20 °C), [ 32 ] and therefore a mass of 15.20 ...
The Imperial gallon was defined with yet another set of temperature and pressure values (62 °F (17 °C) and 30.0 inHg (102 kPa)). To convert a number of wine gallons to the equivalent number of Imperial gallons, multiply by 0.832674, but to convert a number of Imperial gallons to the equivalent number of wine gallons, multiply by 1.20095.