Search results
Results from the WOW.Com Content Network
A torque converter is a device, usually implemented as a type of fluid coupling, that transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the torque converter connects the prime mover to the automatic gear train, which then drives the load.
For example, a torque multiplier with a rating of 3:1 will turn its output shaft with three times the torque, but at one third the speed, of the input shaft. However, due to friction and other inefficiencies in the mechanism, the output torque is slightly lower than the theoretical output.
The first-generation TPU is an 8-bit matrix multiplication engine, driven with CISC instructions by the host processor across a PCIe 3.0 bus. It is manufactured on a 28 nm process with a die size ≤ 331 mm 2. The clock speed is 700 MHz and it has a thermal design power of 28–40 W.
Instructions per second. Instructions per second (IPS) is a measure of a computer 's processor speed. For complex instruction set computers (CISCs), different instructions take different amounts of time, so the value measured depends on the instruction mix; even for comparing processors in the same family the IPS measurement can be problematic.
Original version. Dynaflow (Buick) The Dynaflow was an automatic transmission used in various forms in Buick cars by the General Motors Corporation from 1947 until 1963. The transmission initially used a five-element torque converter, with two turbines and two stators, as well as a planetary gearset that provided two forward speeds plus reverse.
Multiply each bit of one of the arguments, by each bit of the other. Reduce the number of partial products to two by layers of full and half adders. Group the wires in two numbers, and add them with a conventional adder. [3] Compared to naively adding partial products with regular adders, the benefit of the Wallace tree is its faster speed.
Transmission (mechanical device) A transmission (also called a gearbox) is a mechanical device which uses a gear set —two or more gears working together—to change the speed, direction of rotation, or torque multiplication/reduction in a machine. [1][2] Transmissions can have a single fixed-gear ratio, multiple distinct gear ratios, or ...
An incremental encoder is a linear or rotary electromechanical device that has two output signals, A and B, which issue pulses when the device is moved. [1] Together, the A and B signals indicate both the occurrence of and direction of movement. Many incremental encoders have an additional output signal, typically designated index[2] or Z, [3 ...