Search results
Results from the WOW.Com Content Network
Although its shells, 50 x 228 mm, are twice the diameter of the 25×137mm cartridge of the M242, the 50mm cannon is not much longer than the smaller weapon. [2] The overall lengths of the 25mm cannon and 50mm cannon are 105.2 inches (267 cm) and 117.7 inches (299 cm), respectively; while the portion of the gun that intrudes into the turret are ...
The specified maximum diameter of an unfired .50 BMG bullet is 0.510-inch (13.0 mm); while this appears to be over the .50 inch (12.7 mm) maximum allowed for non-sporting Title I firearms under the U.S. National Firearms Act, the barrel of a .50 BMG rifle is only .50 inch (12.7 mm) across the rifling lands and slightly larger in the grooves ...
A .50 caliber handgun is a handgun firing a bullet measuring approximately 0.5 inches (12.7 mm) in diameter intended with the task of penetration. Historically, many black powder pistols fired bullets with diameters well above a half inch.
Actual bullet diameter was reduced to the current 0.500 inches (12.7 mm) rather than the original 0.510 inches (13.0 mm) [6] – thus the noticeably tapered case. Recoil of the .50 AE in the Desert Eagle pistol is substantial, although only marginally more severe than the .44 Magnum, as the automatic mechanism and weight of the gun smooth the ...
These built-up guns were 66 feet 8 inches (20.32 m) long—50 times their 16-inch (406 mm) bore, or 50 calibers from breechface to muzzle. With a full powder charge of 700 pounds (320 kg), the guns were capable of firing a 2,110-pound (960 kg) Mark 3 armor-piercing shell with a muzzle velocity of 2,800 feet per second (850 m/s) firing out to an ...
Each D839 propellant (smokeless powder) grain used for full charges for this gun was 2 in (51 mm) long, 1 in (25 mm) in diameter and had seven perforations, each 0.060 in (1.5 mm) in diameter with a web thickness range of 0.193 to 0.197 in (4.9 to 5.0 mm) between the perforations and the grain diameter. A maximum charge consisted of six silk ...
medium-bore refers to calibers with a diameter of 0.33 inches (8.4 mm) to 0.39 inches (9.9 mm) large-bore refers to calibers with a diameter of 0.40 inches (10 mm) or larger There is much variance in the use of the term "small-bore", which over the years has changed considerably, with anything under 0.577 inches (14.7 mm) considered "small-bore ...
Cooled by the aircraft's slip-stream, the air-cooled 12.7 mm AN/M2 was fitted with a substantially lighter 36-inch (91 cm) length barrel, reducing the weight of the complete unit to 61 pounds (28 kg), [87] [88] which also had the effect of increasing the rate of fire. The full official designation for this weapon was "Browning Machine Gun ...