Search results
Results from the WOW.Com Content Network
Grout sealer is a water-based or solvent-based sealant applied over dried grout that resists water, oil, and acid-based contaminants. Grout cleaner is a basic cleaning solution that is applied on grout lines and removes the dirt and dust. [9] A die grinder is used for faster removal of old grout compared to a standard grout saw.
Scabbling is used to remove road markings, surface contamination (used in the nuclear industry), to add a decorative or textured pattern to concrete, or to prepare a concrete surface prior to the installation of grout. [2] Scarifying machines with flails attached to a drum cage are sometimes referred to as rotary scabblers.
Self-leveling silicone firestop system used around pipe through-penetration in a two-hour fire-resistance rated concrete floor assembly.. Sealant is a substance used to block the passage of fluids through openings in materials, [1] a type of mechanical seal.
Chipseal (also chip seal or chip and seal or spray seal) is a pavement surface treatment that combines one or more layers of asphalt with one or more layers of fine aggregate. In the United States, chipseals are typically used on rural roads carrying lower traffic volumes, and the process is often referred to as asphaltic surface treatment.
Penetrating sealers often require the use of special cleaners which both clean and top up the repellent ingredient left on the stone surface. These sealers are often breathable to a certain degree, but do not penetrate deeply enough (generally less than 1mm) to be effective against salt attack, such as efflorescence and spalling.
Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials from passing.
A list of unfavorable or difficult soil conditions for soil nailing can include dry, poorly graded cohesion-less soils, soils with a high groundwater table, soils with cobbles and boulders, soft to very soft fine-grained soils, highly corrosive soils, weathered rock with unfavorable weakness planes, and loess.
Grout joints are traditionally about 3 ⁄ 8 inch in width. Matching trim shapes such as coves , bases, shoes, and bullnoses are available to turn corners and terminate runs of the tile. For traditional/historic applications, tiles were generally laid in lime mortar, doubling as grout, and with very fine grout joints (sometimes butted without ...